From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 0c149400c2f676e7b4cc68e517db29005a7a38c7 ]
The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a 'hog' suffix.
Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra71-evm.dts | 2 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra76-evm.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index aa426dabb6c3..c3990325f7e6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -315,7 +315,7 @@ pcf_hdmi: gpio@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 64363f75c01a..cf1db1b71bab 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -160,7 +160,7 @@ &pcf_gpio_21 { };
&pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 2e485a13dfd7..a5e65c1a568e 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -272,7 +272,7 @@ pcf_hdmi: pcf8575@26 { */ lines-initial-states = <0x0f2b>;
- p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index f64aab450315..51ff6321199d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -314,7 +314,7 @@ pcf_hdmi: pcf8575@26 { reg = <0x26>; gpio-controller; #gpio-cells = <2>; - p1 { + hdmi-audio-hog { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>;