The polled console (KGDB/KDB) implementation must not call port setup unconditionally as the port may already be in use by the console or a getty.
Only make sure that the receiver is enabled, but do not enable any device interrupts.
Fixes: d8851a96ba25 ("tty: serial: qcom-geni-serial: Add a poll_init() function") Cc: stable@vger.kernel.org # 6.4 Cc: Douglas Anderson dianders@chromium.org Signed-off-by: Johan Hovold johan+linaro@kernel.org --- drivers/tty/serial/qcom_geni_serial.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..c237c9d107cd 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -147,6 +147,7 @@ static struct uart_driver qcom_geni_uart_driver;
static void __qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); static void qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); +static int qcom_geni_serial_port_setup(struct uart_port *uport);
static inline struct qcom_geni_serial_port *to_dev_port(struct uart_port *uport) { @@ -395,6 +396,23 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, writel(c, uport->membase + SE_GENI_TX_FIFOn); qcom_geni_serial_poll_tx_done(uport); } + +static int qcom_geni_serial_poll_init(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + int ret; + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + + if (!qcom_geni_serial_secondary_active(uport)) + geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); + + return 0; +} #endif
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE @@ -1582,7 +1600,7 @@ static const struct uart_ops qcom_geni_console_pops = { #ifdef CONFIG_CONSOLE_POLL .poll_get_char = qcom_geni_serial_get_char, .poll_put_char = qcom_geni_serial_poll_put_char, - .poll_init = qcom_geni_serial_port_setup, + .poll_init = qcom_geni_serial_poll_init, #endif .pm = qcom_geni_serial_pm, };