From: Shenwei Wang shenwei.wang@nxp.com
[ Upstream commit ca50d7765587fe0a8351a6e8d9742cfd4811d925 ]
Add the assigned-clocks and assigned-clock-rates properties for the LPUARTx nodes. Without these properties, the default clock rate used would be 0, which can cause the UART ports to fail when open.
Fixes: 35f4e9d7530f ("arm64: dts: imx8: split adma ss into dma and audio ss") Signed-off-by: Shenwei Wang shenwei.wang@nxp.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index d7b4229bb4a23..9ad56aaf19b42 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -26,6 +26,8 @@ lpuart0: serial@5a060000 { clocks = <&uart0_lpcg IMX_LPCG_CLK_4>, <&uart0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_0>; status = "disabled"; }; @@ -36,6 +38,8 @@ lpuart1: serial@5a070000 { clocks = <&uart1_lpcg IMX_LPCG_CLK_4>, <&uart1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_1>; status = "disabled"; }; @@ -46,6 +50,8 @@ lpuart2: serial@5a080000 { clocks = <&uart2_lpcg IMX_LPCG_CLK_4>, <&uart2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_2>; status = "disabled"; }; @@ -56,6 +62,8 @@ lpuart3: serial@5a090000 { clocks = <&uart3_lpcg IMX_LPCG_CLK_4>, <&uart3_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "baud"; + assigned-clocks = <&clk IMX_SC_R_UART_3 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <80000000>; power-domains = <&pd IMX_SC_R_UART_3>; status = "disabled"; };