6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit c72ede1c24be689733bcd2233a3a56f2478429c8 ]
NAND did not work on my USB-A9263. I discovered that the offending commit converted the PIO bank for chip selects wrongly, so all A9263 boards need to be fixed.
Fixes: 1004a2977bdc ("ARM: dts: at91: Switch to the new NAND bindings") Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Alexandre Belloni alexandre.belloni@bootlin.com Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering... Signed-off-by: Claudiu Beznea claudiu.beznea@tuxon.dev Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/at91sam9263ek.dts | 2 +- arch/arm/boot/dts/tny_a9263.dts | 2 +- arch/arm/boot/dts/usb_a9263.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index ce8baff6a9f4e..e42e1a75a715d 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -152,7 +152,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 62b7d9f9a926c..c8b6318aaa838 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -64,7 +64,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index c9d0058e90813..83d0b98dd287b 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -84,7 +84,7 @@ nand@3 { reg = <0x3 0x0 0x800000>; rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; nand-bus-width = <8>; nand-ecc-mode = "soft"; nand-on-flash-bbt;