From: "Maciej S. Szmigiero" mail@maciej.szmigiero.name
[ Upstream commit 166fbcf88fdafa02f784ec25ac64745c716b2de0 ]
This adds support for watchdog part of Fintek F71868 Super I/O chip to f71808e_wdt driver.
The F71868 chip is, in general, very similar to a F71869, however it has slightly different set of available reset pulse widths.
Tested on MSI A55M-P33 motherboard.
Signed-off-by: Maciej S. Szmigiero mail@maciej.szmigiero.name Reviewed-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Wim Van Sebroeck wim@iguana.be Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- drivers/watchdog/Kconfig | 7 ++++--- drivers/watchdog/f71808e_wdt.c | 27 ++++++++++++++++++++------- 2 files changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 3eb58cb51e56..8f8909a668d7 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -799,11 +799,12 @@ config EBC_C384_WDT the timeout module parameter.
config F71808E_WDT - tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog" + tristate "Fintek F718xx, F818xx Super I/O Watchdog" depends on X86 help - This is the driver for the hardware watchdog on the Fintek - F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers. + This is the driver for the hardware watchdog on the Fintek F71808E, + F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866 + Super I/O controllers.
You can compile this driver directly into the kernel, or use it as a module. The module will be called f71808e_wdt. diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c index 1b7e9169072f..8658dba21768 100644 --- a/drivers/watchdog/f71808e_wdt.c +++ b/drivers/watchdog/f71808e_wdt.c @@ -57,6 +57,7 @@ #define SIO_F71808_ID 0x0901 /* Chipset ID */ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ +#define SIO_F71868_ID 0x1106 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ #define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ @@ -101,7 +102,7 @@ MODULE_PARM_DESC(timeout, static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH; module_param(pulse_width, uint, 0); MODULE_PARM_DESC(pulse_width, - "Watchdog signal pulse width. 0(=level), 1 ms, 25 ms, 125 ms or 5000 ms" + "Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms" " (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN; @@ -119,13 +120,14 @@ module_param(start_withtimeout, uint, 0); MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with" " given initial timeout. Zero (default) disables this feature.");
-enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865, - f81866}; +enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg, + f81865, f81866};
static const char *f71808e_names[] = { "f71808fg", "f71858fg", "f71862fg", + "f71868", "f71869", "f71882fg", "f71889fg", @@ -252,16 +254,23 @@ static int watchdog_set_timeout(int timeout) static int watchdog_set_pulse_width(unsigned int pw) { int err = 0; + unsigned int t1 = 25, t2 = 125, t3 = 5000; + + if (watchdog.type == f71868) { + t1 = 30; + t2 = 150; + t3 = 6000; + }
mutex_lock(&watchdog.lock);
- if (pw <= 1) { + if (pw <= 1) { watchdog.pulse_val = 0; - } else if (pw <= 25) { + } else if (pw <= t1) { watchdog.pulse_val = 1; - } else if (pw <= 125) { + } else if (pw <= t2) { watchdog.pulse_val = 2; - } else if (pw <= 5000) { + } else if (pw <= t3) { watchdog.pulse_val = 3; } else { pr_err("pulse width out of range\n"); @@ -354,6 +363,7 @@ static int watchdog_start(void) goto exit_superio; break;
+ case f71868: case f71869: /* GPIO14 --> WDTRST# */ superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4); @@ -792,6 +802,9 @@ static int __init f71808e_find(int sioaddr) watchdog.type = f71862fg; err = f71862fg_pin_configure(0); /* validate module parameter */ break; + case SIO_F71868_ID: + watchdog.type = f71868; + break; case SIO_F71869_ID: case SIO_F71869A_ID: watchdog.type = f71869;