This is a note to let you know that I've just added the patch titled
Revert "usb: dwc3: don't reset device side if dwc3 was configured as
to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-testing branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will be merged to the usb-next branch sometime soon, after it passes testing, and the merge window is open.
If you have any questions about this process, please let me know.
From afe28cd686aeb77e8d9140d50fb1cf06a7ecb731 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Thinh.Nguyen@synopsys.com Date: Fri, 22 Dec 2023 22:11:33 +0000 Subject: Revert "usb: dwc3: don't reset device side if dwc3 was configured as host-only"
This reverts commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7.
Don't omit soft-reset. During initialization, the driver may need to perform a soft reset to ensure the phy is ready when the controller updates the GCTL.PRTCAPDIR or other settings by issuing phy soft-reset. Many platforms often have access to DCTL register for soft-reset despite being host-only. If there are actual reported issues from the platforms that don't expose DCTL registers, then we will need to revisit (perhaps to teach dwc3 to perform xhci's soft-reset USBCMD.HCRST).
Cc: stable@vger.kernel.org Fixes: e835c0a4e23c ("usb: dwc3: don't reset device side if dwc3 was configured as host-only") Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/7668ab11a48f260820825274976eb41fec7f54d1.170328246... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 832c41fec4f7..f50b5575d588 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode or current role is host, then we can return early. + * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);