From: Clément Lassieur clement@lassieur.org
[ Upstream commit aafe93516b8567ab5864e1f4cd3eeabc54fb0e5a ]
Every time the hub signals a reset while we (device) are hsotg->connected, dwc2_hsotg_core_init_disconnected() is called, which in turn calls dwc2_hs_phy_init().
GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the default one: 0x5, corresponding to 16-bit) is always different from hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every time (usbcfg != usbcfg_old), which causes 2 issues:
1) The call to dwc2_core_reset() does another reset 300us after the initial Chirp K of the first reset (which should last at least Tuch = 1ms), and messes up the High-speed Detection Handshake: both hub and device drive current into the D+ and D- lines at the same time.
2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always the default one (0x5).
Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset() fixes both issues. It is now set even when select_phy is false because the cost of the Core Soft Reset is removed.
Fixes: 1e868545f2bb ("usb: dwc2: gadget: Move gadget phy init into core phy init") Signed-off-by: Clément Lassieur clement@lassieur.org Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/core.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 6f70ab9577b4..272ae5722c86 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -1111,15 +1111,6 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16); if (hsotg->params.phy_utmi_width == 16) usbcfg |= GUSBCFG_PHYIF16; - - /* Set turnaround time */ - if (dwc2_is_device_mode(hsotg)) { - usbcfg &= ~GUSBCFG_USBTRDTIM_MASK; - if (hsotg->params.phy_utmi_width == 16) - usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT; - else - usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT; - } break; default: dev_err(hsotg->dev, "FS PHY selected at HS!\n"); @@ -1141,6 +1132,24 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) return retval; }
+static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + + if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI) + return; + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + + usbcfg &= ~GUSBCFG_USBTRDTIM_MASK; + if (hsotg->params.phy_utmi_width == 16) + usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT; + else + usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT; + + dwc2_writel(hsotg, usbcfg, GUSBCFG); +} + int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) { u32 usbcfg; @@ -1158,6 +1167,9 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) retval = dwc2_hs_phy_init(hsotg, select_phy); if (retval) return retval; + + if (dwc2_is_device_mode(hsotg)) + dwc2_set_turnaround_time(hsotg); }
if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&