From: Wolfram Sang wsa+renesas@sang-engineering.com
commit e43e0df13f8528ca55ed79f469c4b2af897fa796 upstream.
When calculating the bus speed, the clock should be on, of course. Most bootloaders left them on, so this went unnoticed so far.
Move the ioremapping out of this clock-enabled-block and prepare for adding hw initialization there, too.
Reported-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Signed-off-by: Wolfram Sang wsa@the-dreams.de [fabrizio: cherry-picked to 4.4] Signed-off-by: Fabrizio Castro fabrizio.castro@bp.renesas.com Reviewed-by: Chris Paterson Chris.Paterson2@renesas.com --- drivers/i2c/busses/i2c-rcar.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 599c0d7..fef53c1 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -650,19 +650,23 @@ static int rcar_i2c_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->io = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->io)) + return PTR_ERR(priv->io); + bus_speed = 100000; /* default 100 kHz */ of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data;
+ pm_runtime_enable(dev); + pm_runtime_get_sync(dev); ret = rcar_i2c_clock_calculate(priv, bus_speed, dev); if (ret < 0) - return ret; + goto out_pm_put;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->io = devm_ioremap_resource(dev, res); - if (IS_ERR(priv->io)) - return PTR_ERR(priv->io); + pm_runtime_put(dev);
irq = platform_get_irq(pdev, 0); init_waitqueue_head(&priv->wait); @@ -682,22 +686,26 @@ static int rcar_i2c_probe(struct platform_device *pdev) dev_name(dev), priv); if (ret < 0) { dev_err(dev, "cannot get irq %d\n", irq); - return ret; + goto out_pm_disable; }
- pm_runtime_enable(dev); platform_set_drvdata(pdev, priv);
ret = i2c_add_numbered_adapter(adap); if (ret < 0) { dev_err(dev, "reg adap failed: %d\n", ret); - pm_runtime_disable(dev); - return ret; + goto out_pm_disable; }
dev_info(dev, "probed\n");
return 0; + + out_pm_put: + pm_runtime_put(dev); + out_pm_disable: + pm_runtime_disable(dev); + return ret; }
static int rcar_i2c_remove(struct platform_device *pdev)