5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martynas Pumputis m@lambda.lt
commit dab4e1f06cabb6834de14264394ccab197007302 upstream.
Extend the bpf_fib_lookup() helper by making it to return the source IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.
For example, the following snippet can be used to derive the desired source IP address:
struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };
ret = bpf_skb_fib_lookup(skb, p, sizeof(p), BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH); if (ret != BPF_FIB_LKUP_RET_SUCCESS) return TC_ACT_SHOT;
/* the p.ipv4_src now contains the source address */
The inability to derive the proper source address may cause malfunctions in BPF-based dataplanes for hosts containing netdevs with more than one routable IP address or for multi-homed hosts.
For example, Cilium implements packet masquerading in BPF. If an egressing netdev to which the Cilium's BPF prog is attached has multiple IP addresses, then only one [hardcoded] IP address can be used for masquerading. This breaks connectivity if any other IP address should have been selected instead, for example, when a public and private addresses are attached to the same egress interface.
The change was tested with Cilium [1].
Nikolay Aleksandrov helped to figure out the IPv6 addr selection.
[1]: https://github.com/cilium/cilium/pull/28283
Signed-off-by: Martynas Pumputis m@lambda.lt Link: https://lore.kernel.org/r/20231007081415.33502-2-m@lambda.lt Signed-off-by: Martin KaFai Lau martin.lau@kernel.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/ipv6_stubs.h | 5 +++++ include/uapi/linux/bpf.h | 10 ++++++++++ net/core/filter.c | 18 +++++++++++++++++- net/ipv6/af_inet6.c | 1 + tools/include/uapi/linux/bpf.h | 10 ++++++++++ 5 files changed, 43 insertions(+), 1 deletion(-)
--- a/include/net/ipv6_stubs.h +++ b/include/net/ipv6_stubs.h @@ -81,6 +81,11 @@ struct ipv6_bpf_stub { const struct in6_addr *daddr, __be16 dport, int dif, int sdif, struct udp_table *tbl, struct sk_buff *skb); + int (*ipv6_dev_get_saddr)(struct net *net, + const struct net_device *dst_dev, + const struct in6_addr *daddr, + unsigned int prefs, + struct in6_addr *saddr); }; extern const struct ipv6_bpf_stub *ipv6_bpf_stub __read_mostly;
--- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3023,6 +3023,11 @@ union bpf_attr { * and *params*->smac will not be set as output. A common * use case is to call **bpf_redirect_neigh**\ () after * doing **bpf_fib_lookup**\ (). + * **BPF_FIB_LOOKUP_SRC** + * Derive and set source IP addr in *params*->ipv{4,6}_src + * for the nexthop. If the src addr cannot be derived, + * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this + * case, *params*->dmac and *params*->smac are not set either. * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -6051,6 +6056,7 @@ enum { BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), BPF_FIB_LOOKUP_TBID = (1U << 3), + BPF_FIB_LOOKUP_SRC = (1U << 4), };
enum { @@ -6063,6 +6069,7 @@ enum { BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ };
struct bpf_fib_lookup { @@ -6097,6 +6104,9 @@ struct bpf_fib_lookup { __u32 rt_metric; };
+ /* input: source address to consider for lookup + * output: source address result from lookup + */ union { __be32 ipv4_src; __u32 ipv6_src[4]; /* in6_addr; network order */ --- a/net/core/filter.c +++ b/net/core/filter.c @@ -5504,6 +5504,9 @@ static int bpf_ipv4_fib_lookup(struct ne params->rt_metric = res.fi->fib_priority; params->ifindex = dev->ifindex;
+ if (flags & BPF_FIB_LOOKUP_SRC) + params->ipv4_src = fib_result_prefsrc(net, &res); + /* xdp and cls_bpf programs are run in RCU-bh so * rcu_read_lock_bh is not needed here */ @@ -5646,6 +5649,18 @@ static int bpf_ipv6_fib_lookup(struct ne params->rt_metric = res.f6i->fib6_metric; params->ifindex = dev->ifindex;
+ if (flags & BPF_FIB_LOOKUP_SRC) { + if (res.f6i->fib6_prefsrc.plen) { + *src = res.f6i->fib6_prefsrc.addr; + } else { + err = ipv6_bpf_stub->ipv6_dev_get_saddr(net, dev, + &fl6.daddr, 0, + src); + if (err) + return BPF_FIB_LKUP_RET_NO_SRC_ADDR; + } + } + if (flags & BPF_FIB_LOOKUP_SKIP_NEIGH) goto set_fwd_params;
@@ -5664,7 +5679,8 @@ set_fwd_params: #endif
#define BPF_FIB_LOOKUP_MASK (BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_OUTPUT | \ - BPF_FIB_LOOKUP_SKIP_NEIGH | BPF_FIB_LOOKUP_TBID) + BPF_FIB_LOOKUP_SKIP_NEIGH | BPF_FIB_LOOKUP_TBID | \ + BPF_FIB_LOOKUP_SRC)
BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx, struct bpf_fib_lookup *, params, int, plen, u32, flags) --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -1061,6 +1061,7 @@ static const struct ipv6_stub ipv6_stub_ static const struct ipv6_bpf_stub ipv6_bpf_stub_impl = { .inet6_bind = __inet6_bind, .udp6_lib_lookup = __udp6_lib_lookup, + .ipv6_dev_get_saddr = ipv6_dev_get_saddr, };
static int __init inet6_init(void) --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -3023,6 +3023,11 @@ union bpf_attr { * and *params*->smac will not be set as output. A common * use case is to call **bpf_redirect_neigh**\ () after * doing **bpf_fib_lookup**\ (). + * **BPF_FIB_LOOKUP_SRC** + * Derive and set source IP addr in *params*->ipv{4,6}_src + * for the nexthop. If the src addr cannot be derived, + * **BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this + * case, *params*->dmac and *params*->smac are not set either. * * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. @@ -6051,6 +6056,7 @@ enum { BPF_FIB_LOOKUP_OUTPUT = (1U << 1), BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2), BPF_FIB_LOOKUP_TBID = (1U << 3), + BPF_FIB_LOOKUP_SRC = (1U << 4), };
enum { @@ -6063,6 +6069,7 @@ enum { BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ + BPF_FIB_LKUP_RET_NO_SRC_ADDR, /* failed to derive IP src addr */ };
struct bpf_fib_lookup { @@ -6097,6 +6104,9 @@ struct bpf_fib_lookup { __u32 rt_metric; };
+ /* input: source address to consider for lookup + * output: source address result from lookup + */ union { __be32 ipv4_src; __u32 ipv6_src[4]; /* in6_addr; network order */