Re: [PATCH 4.19 078/149] gpio: max77620: Use correct unit for debounce times

Hi!

The gpiod_set_debounce() function takes the debounce time in microseconds. Adjust the switch/case values in the MAX77620 GPIO to use the correct unit.

+++ b/drivers/gpio/gpio-max77620.c @@ -163,13 +163,13 @@ static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio, case 0: val = MAX77620_CNFG_GPIO_DBNC_None; break;

• case 1 ... 8:

• case 1000 ... 8000: val = MAX77620_CNFG_GPIO_DBNC_8ms; break;

AFAICT the range should be 1 ... 8000, then 8001 ... 16000 etc below...

• case 9 ... 16:

• case 9000 ... 16000: val = MAX77620_CNFG_GPIO_DBNC_16ms; break;

• case 17 ... 32:

• case 17000 ... 32000: val = MAX77620_CNFG_GPIO_DBNC_32ms; break; default:

Best regards, Pavel