6.16-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kang Yang kang.yang@oss.qualcomm.com
[ Upstream commit c256a94d1b1b15109740306f7f2a7c2173e12072 ]
In rare cases, ath10k may lose connection with the PCIe bus due to some unknown reasons, which could further lead to system crashes during resuming due to watchdog timeout:
ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware ath10k_pci 0000:01:00.0: already restarting ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11 ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11 ieee80211 phy0: PM: **** DPM device timeout **** Call Trace: panic+0x125/0x315 dpm_watchdog_set+0x54/0x54 dpm_watchdog_handler+0x57/0x57 call_timer_fn+0x31/0x13c
At this point, all WMI commands will timeout and attempt to restart device. So set a threshold for consecutive restart failures. If the threshold is exceeded, consider the hardware is unreliable and all ath10k operations should be skipped to avoid system crash.
fail_cont_count and pending_recovery are atomic variables, and do not involve complex conditional logic. Therefore, even if recovery check and reconfig complete are executed concurrently, the recovery mechanism will not be broken.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1
Signed-off-by: Kang Yang kang.yang@oss.qualcomm.com Reviewed-by: Loic Poulain loic.poulain@oss.qualcomm.com Link: https://patch.msgid.link/20250623022731.509-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson jeff.johnson@oss.qualcomm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath10k/core.c | 48 +++++++++++++++++++++++--- drivers/net/wireless/ath/ath10k/core.h | 11 ++++-- drivers/net/wireless/ath/ath10k/mac.c | 7 +++- drivers/net/wireless/ath/ath10k/wmi.c | 6 ++++ 4 files changed, 63 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index fe3a8f4a1cc1..8b659678856d 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2491,12 +2491,50 @@ static int ath10k_init_hw_params(struct ath10k *ar) return 0; }
+static bool ath10k_core_needs_recovery(struct ath10k *ar) +{ + long time_left; + + /* Sometimes the recovery will fail and then the next all recovery fail, + * so avoid infinite recovery. + */ + if (atomic_read(&ar->fail_cont_count) >= ATH10K_RECOVERY_MAX_FAIL_COUNT) { + ath10k_err(ar, "consecutive fail %d times, will shutdown driver!", + atomic_read(&ar->fail_cont_count)); + ar->state = ATH10K_STATE_WEDGED; + return false; + } + + ath10k_dbg(ar, ATH10K_DBG_BOOT, "total recovery count: %d", ++ar->recovery_count); + + if (atomic_read(&ar->pending_recovery)) { + /* Sometimes it happened another recovery work before the previous one + * completed, then the second recovery work will destroy the previous + * one, thus below is to avoid that. + */ + time_left = wait_for_completion_timeout(&ar->driver_recovery, + ATH10K_RECOVERY_TIMEOUT_HZ); + if (time_left) { + ath10k_warn(ar, "previous recovery succeeded, skip this!\n"); + return false; + } + + /* Record the continuous recovery fail count when recovery failed. */ + atomic_inc(&ar->fail_cont_count); + + /* Avoid having multiple recoveries at the same time. */ + return false; + } + + atomic_inc(&ar->pending_recovery); + + return true; +} + void ath10k_core_start_recovery(struct ath10k *ar) { - if (test_and_set_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags)) { - ath10k_warn(ar, "already restarting\n"); + if (!ath10k_core_needs_recovery(ar)) return; - }
queue_work(ar->workqueue, &ar->restart_work); } @@ -2532,6 +2570,8 @@ static void ath10k_core_restart(struct work_struct *work) struct ath10k *ar = container_of(work, struct ath10k, restart_work); int ret;
+ reinit_completion(&ar->driver_recovery); + set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
/* Place a barrier to make sure the compiler doesn't reorder @@ -2596,8 +2636,6 @@ static void ath10k_core_restart(struct work_struct *work) if (ret) ath10k_warn(ar, "failed to send firmware crash dump via devcoredump: %d", ret); - - complete(&ar->driver_recovery); }
static void ath10k_core_set_coverage_class_work(struct work_struct *work) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 446dca74f06a..85e16c945b5c 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -4,6 +4,7 @@ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */
#ifndef _CORE_H_ @@ -87,6 +88,8 @@ IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER) #define ATH10K_ITER_RESUME_FLAGS (IEEE80211_IFACE_ITER_RESUME_ALL |\ IEEE80211_IFACE_SKIP_SDATA_NOT_IN_DRIVER) +#define ATH10K_RECOVERY_TIMEOUT_HZ (5 * HZ) +#define ATH10K_RECOVERY_MAX_FAIL_COUNT 4
struct ath10k;
@@ -865,9 +868,6 @@ enum ath10k_dev_flags { /* Per Station statistics service */ ATH10K_FLAG_PEER_STATS,
- /* Indicates that ath10k device is during recovery process and not complete */ - ATH10K_FLAG_RESTARTING, - /* protected by conf_mutex */ ATH10K_FLAG_NAPI_ENABLED, }; @@ -1211,6 +1211,11 @@ struct ath10k { struct work_struct bundle_tx_work; struct work_struct tx_complete_work;
+ atomic_t pending_recovery; + unsigned int recovery_count; + /* continuous recovery fail count */ + atomic_t fail_cont_count; + /* cycle count is reported twice for each visited channel during scan. * access protected by data_lock */ diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 07fe05384cdf..9e6f294cd5b6 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -8156,7 +8156,12 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw, ath10k_info(ar, "device successfully recovered\n"); ar->state = ATH10K_STATE_ON; ieee80211_wake_queues(ar->hw); - clear_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags); + + /* Clear recovery state. */ + complete(&ar->driver_recovery); + atomic_set(&ar->fail_cont_count, 0); + atomic_set(&ar->pending_recovery, 0); + if (ar->hw_params.hw_restart_disconnect) { list_for_each_entry(arvif, &ar->arvifs, list) { if (arvif->is_up && arvif->vdev_type == WMI_VDEV_TYPE_STA) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index df6a24f8f8d5..cb8ae751eb31 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4,6 +4,7 @@ * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */
#include <linux/skbuff.h> @@ -1941,6 +1942,11 @@ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id) }
wait_event_timeout(ar->wmi.tx_credits_wq, ({ + if (ar->state == ATH10K_STATE_WEDGED) { + ret = -ESHUTDOWN; + ath10k_dbg(ar, ATH10K_DBG_WMI, + "drop wmi command %d, hardware is wedged\n", cmd_id); + } /* try to send pending beacons first. they take priority */ ath10k_wmi_tx_beacons_nowait(ar);