When executing clock_gettime(), either in the vDSO or via a system call, we need to ensure that the read of the counter register occurs within the seqlock reader critical section. This ensures that updates to the clocksource parameters (e.g. the multiplier) are consistent with the counter value and therefore avoids the situation where time appears to go backwards across multiple reads.
Extend the vDSO logic so that the seqlock critical section covers the read of the counter register as well as accesses to the data page. Since reads of the counter system registers are not ordered by memory barrier instructions, introduce dependency ordering from the counter read to a subsequent memory access so that the seqlock memory barriers apply to the counter access in both the vDSO and the system call paths.
Cc: stable@vger.kernel.org Cc: Marc Zyngier marc.zyngier@arm.com Cc: Vincenzo Frascino vincenzo.frascino@arm.com Link: https://lore.kernel.org/linux-arm-kernel/alpine.DEB.2.21.1902081950260.1662@... Reported-by: Thomas Gleixner tglx@linutronix.de Signed-off-by: Will Deacon will.deacon@arm.com --- arch/arm64/include/asm/arch_timer.h | 33 +++++++++++++++++++++++++++++++-- arch/arm64/kernel/vdso/gettimeofday.S | 15 +++++++++++---- 2 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index f2a234d6516c..93e07512b4b6 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h @@ -148,18 +148,47 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl) isb(); }
+/* + * Ensure that reads of the counter are treated the same as memory reads + * for the purposes of ordering by subsequent memory barriers. + * + * This insanity brought to you by speculative system register reads, + * out-of-order memory accesses, sequence locks and Thomas Gleixner. + * + * http://lists.infradead.org/pipermail/linux-arm-kernel/2019-February/631195.h... + */ +#define arch_counter_enforce_ordering(val) do { \ + u64 tmp, _val = (val); \ + \ + asm volatile( \ + " eor %0, %1, %1\n" \ + " add %0, sp, %0\n" \ + " ldr xzr, [%0]" \ + : "=r" (tmp) : "r" (_val)); \ +} while (0) + static inline u64 arch_counter_get_cntpct(void) { + u64 cnt; + isb(); - return arch_timer_reg_read_stable(cntpct_el0); + cnt = arch_timer_reg_read_stable(cntpct_el0); + arch_counter_enforce_ordering(cnt); + return cnt; }
static inline u64 arch_counter_get_cntvct(void) { + u64 cnt; + isb(); - return arch_timer_reg_read_stable(cntvct_el0); + cnt = arch_timer_reg_read_stable(cntvct_el0); + arch_counter_enforce_ordering(cnt); + return cnt; }
+#undef arch_counter_enforce_ordering + static inline int arch_timer_arch_init(void) { return 0; diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index 21805e416483..856fee6d3512 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -73,6 +73,13 @@ x_tmp .req x8 movn x_tmp, #0xff00, lsl #48 and \res, x_tmp, \res mul \res, \res, \mult + /* + * Fake address dependency from the value computed from the counter + * register to subsequent data page accesses so that the sequence + * locking also orders the read of the counter. + */ + and x_tmp, \res, xzr + add vdso_data, vdso_data, x_tmp .endm
/* @@ -147,12 +154,12 @@ ENTRY(__kernel_gettimeofday) /* w11 = cs_mono_mult, w12 = cs_shift */ ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] - seqcnt_check fail=1b
get_nsec_per_sec res=x9 lsl x9, x9, x12
get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 + seqcnt_check fail=1b get_ts_realtime res_sec=x10, res_nsec=x11, \ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9
@@ -211,13 +218,13 @@ realtime: /* w11 = cs_mono_mult, w12 = cs_shift */ ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] - seqcnt_check fail=realtime
/* All computations are done with left-shifted nsecs. */ get_nsec_per_sec res=x9 lsl x9, x9, x12
get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 + seqcnt_check fail=realtime get_ts_realtime res_sec=x10, res_nsec=x11, \ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9 clock_gettime_return, shift=1 @@ -231,7 +238,6 @@ monotonic: ldp w11, w12, [vdso_data, #VDSO_CS_MONO_MULT] ldp x13, x14, [vdso_data, #VDSO_XTIME_CLK_SEC] ldp x3, x4, [vdso_data, #VDSO_WTM_CLK_SEC] - seqcnt_check fail=monotonic
/* All computations are done with left-shifted nsecs. */ lsl x4, x4, x12 @@ -239,6 +245,7 @@ monotonic: lsl x9, x9, x12
get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 + seqcnt_check fail=monotonic get_ts_realtime res_sec=x10, res_nsec=x11, \ clock_nsec=x15, xtime_sec=x13, xtime_nsec=x14, nsec_to_sec=x9
@@ -253,13 +260,13 @@ monotonic_raw: /* w11 = cs_raw_mult, w12 = cs_shift */ ldp w12, w11, [vdso_data, #VDSO_CS_SHIFT] ldp x13, x14, [vdso_data, #VDSO_RAW_TIME_SEC] - seqcnt_check fail=monotonic_raw
/* All computations are done with left-shifted nsecs. */ get_nsec_per_sec res=x9 lsl x9, x9, x12
get_clock_shifted_nsec res=x15, cycle_last=x10, mult=x11 + seqcnt_check fail=monotonic_raw get_ts_clock_raw res_sec=x10, res_nsec=x11, \ clock_nsec=x15, nsec_to_sec=x9