From: H. Nikolaus Schaller hns@goldelico.com
commit 181739822cf6f8f4e12b173913af2967a28906c0 upstream.
With the arrival of
commit 2fee9583198eb9 ("spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors")
it was clarified what the proper state for cs-gpios should be, even if the flag is ignored. The driver code is doing the right thing since
766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
The chip-select of the td028ttec1 panel is active-low, so we must omit spi-cs-high; attribute (already removed by separate patch) and should now use GPIO_ACTIVE_LOW for the client device description to be fully consistent.
Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") CC: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/omap3-gta04.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 003202d12990..7b8c18e6605e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -114,7 +114,7 @@ spi_lcd: spi_lcd { gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>;
/* lcd panel */