From: Tomi Valkeinen tomi.valkeinen@ideasonboard.com
Move UB953 register defines to a header file. This is done so that the deserializer driver can access the defines, and do some early serializer configuration.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Signed-off-by: Jai Luthra jai.luthra@ideasonboard.com --- drivers/media/i2c/ds90ub953.c | 89 +--------------------------------------- drivers/media/i2c/ds90ub953.h | 95 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 97 insertions(+), 87 deletions(-)
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index a5c23e94f4eab5896a2114cfdf2e5f68cde77568..c305b4e03e07798b6526ff2423811f3f7d5bdac8 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -28,6 +28,8 @@ #include <media/v4l2-mediabus.h> #include <media/v4l2-subdev.h>
+#include "ds90ub953.h" + #define UB953_PAD_SINK 0 #define UB953_PAD_SOURCE 1
@@ -35,93 +37,6 @@
#define UB953_DEFAULT_CLKOUT_RATE 25000000UL
-#define UB953_REG_RESET_CTL 0x01 -#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) -#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) - -#define UB953_REG_GENERAL_CFG 0x02 -#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) -#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 -#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) -#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) -#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) - -#define UB953_REG_MODE_SEL 0x03 -#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) -#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) -#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) - -#define UB953_REG_CLKOUT_CTRL0 0x06 -#define UB953_REG_CLKOUT_CTRL1 0x07 - -#define UB953_REG_I2C_CONTROL2 0x0a -#define UB953_REG_I2C_CONTROL2_SDA_OUTPUT_SETUP_SHIFT 4 -#define UB953_REG_I2C_CONTROL2_BUS_SPEEDUP BIT(1) - -#define UB953_REG_SCL_HIGH_TIME 0x0b -#define UB953_REG_SCL_LOW_TIME 0x0c - -#define UB953_REG_LOCAL_GPIO_DATA 0x0d -#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) -#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) - -#define UB953_REG_GPIO_INPUT_CTRL 0x0e -#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) -#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) - -#define UB953_REG_BC_CTRL 0x49 -#define UB953_REG_BC_CTRL_CRC_ERR_CLR BIT(3) - -#define UB953_REG_REV_MASK_ID 0x50 -#define UB953_REG_GENERAL_STATUS 0x52 - -#define UB953_REG_GPIO_PIN_STS 0x53 -#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) - -#define UB953_REG_BIST_ERR_CNT 0x54 -#define UB953_REG_CRC_ERR_CNT1 0x55 -#define UB953_REG_CRC_ERR_CNT2 0x56 - -#define UB953_REG_CSI_ERR_CNT 0x5c -#define UB953_REG_CSI_ERR_STATUS 0x5d -#define UB953_REG_CSI_ERR_DLANE01 0x5e -#define UB953_REG_CSI_ERR_DLANE23 0x5f -#define UB953_REG_CSI_ERR_CLK_LANE 0x60 -#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 -#define UB953_REG_PKT_HDR_WC_LSB 0x62 -#define UB953_REG_PKT_HDR_WC_MSB 0x63 -#define UB953_REG_CSI_ECC 0x64 - -#define UB953_REG_IND_ACC_CTL 0xb0 -#define UB953_REG_IND_ACC_ADDR 0xb1 -#define UB953_REG_IND_ACC_DATA 0xb2 - -#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) -#define UB953_REG_FPD3_RX_ID_LEN 6 - -/* Indirect register blocks */ -#define UB953_IND_TARGET_PAT_GEN 0x00 -#define UB953_IND_TARGET_FPD3_TX 0x01 -#define UB953_IND_TARGET_DIE_ID 0x02 - -#define UB953_IND_PGEN_CTL 0x01 -#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) -#define UB953_IND_PGEN_CFG 0x02 -#define UB953_IND_PGEN_CSI_DI 0x03 -#define UB953_IND_PGEN_LINE_SIZE1 0x04 -#define UB953_IND_PGEN_LINE_SIZE0 0x05 -#define UB953_IND_PGEN_BAR_SIZE1 0x06 -#define UB953_IND_PGEN_BAR_SIZE0 0x07 -#define UB953_IND_PGEN_ACT_LPF1 0x08 -#define UB953_IND_PGEN_ACT_LPF0 0x09 -#define UB953_IND_PGEN_TOT_LPF1 0x0a -#define UB953_IND_PGEN_TOT_LPF0 0x0b -#define UB953_IND_PGEN_LINE_PD1 0x0c -#define UB953_IND_PGEN_LINE_PD0 0x0d -#define UB953_IND_PGEN_VBP 0x0e -#define UB953_IND_PGEN_VFP 0x0f -#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ - /* Note: Only sync mode supported for now */ enum ub953_mode { /* FPD-Link III CSI-2 synchronous mode */ diff --git a/drivers/media/i2c/ds90ub953.h b/drivers/media/i2c/ds90ub953.h new file mode 100644 index 0000000000000000000000000000000000000000..8bb28f0daee96044a7bf838a680e506af4f70f10 --- /dev/null +++ b/drivers/media/i2c/ds90ub953.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __MEDIA_I2C_DS90UB953_H__ +#define __MEDIA_I2C_DS90UB953_H__ + +#include <linux/types.h> + +#define UB953_REG_RESET_CTL 0x01 +#define UB953_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) +#define UB953_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) + +#define UB953_REG_GENERAL_CFG 0x02 +#define UB953_REG_GENERAL_CFG_CONT_CLK BIT(6) +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT 4 +#define UB953_REG_GENERAL_CFG_CSI_LANE_SEL_MASK GENMASK(5, 4) +#define UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE BIT(1) +#define UB953_REG_GENERAL_CFG_I2C_STRAP_MODE BIT(0) + +#define UB953_REG_MODE_SEL 0x03 +#define UB953_REG_MODE_SEL_MODE_DONE BIT(3) +#define UB953_REG_MODE_SEL_MODE_OVERRIDE BIT(4) +#define UB953_REG_MODE_SEL_MODE_MASK GENMASK(2, 0) + +#define UB953_REG_CLKOUT_CTRL0 0x06 +#define UB953_REG_CLKOUT_CTRL1 0x07 + +#define UB953_REG_I2C_CONTROL2 0x0a +#define UB953_REG_I2C_CONTROL2_SDA_OUTPUT_SETUP_SHIFT 4 +#define UB953_REG_I2C_CONTROL2_BUS_SPEEDUP BIT(1) + +#define UB953_REG_SCL_HIGH_TIME 0x0b +#define UB953_REG_SCL_LOW_TIME 0x0c + +#define UB953_REG_LOCAL_GPIO_DATA 0x0d +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_RMTEN(n) BIT(4 + (n)) +#define UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(n) BIT(0 + (n)) + +#define UB953_REG_GPIO_INPUT_CTRL 0x0e +#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) +#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) + +#define UB953_REG_BC_CTRL 0x49 +#define UB953_REG_BC_CTRL_CRC_ERR_CLR BIT(3) + +#define UB953_REG_REV_MASK_ID 0x50 +#define UB953_REG_GENERAL_STATUS 0x52 + +#define UB953_REG_GPIO_PIN_STS 0x53 +#define UB953_REG_GPIO_PIN_STS_GPIO_STS(n) BIT(0 + (n)) + +#define UB953_REG_BIST_ERR_CNT 0x54 +#define UB953_REG_CRC_ERR_CNT1 0x55 +#define UB953_REG_CRC_ERR_CNT2 0x56 + +#define UB953_REG_CSI_ERR_CNT 0x5c +#define UB953_REG_CSI_ERR_STATUS 0x5d +#define UB953_REG_CSI_ERR_DLANE01 0x5e +#define UB953_REG_CSI_ERR_DLANE23 0x5f +#define UB953_REG_CSI_ERR_CLK_LANE 0x60 +#define UB953_REG_CSI_PKT_HDR_VC_ID 0x61 +#define UB953_REG_PKT_HDR_WC_LSB 0x62 +#define UB953_REG_PKT_HDR_WC_MSB 0x63 +#define UB953_REG_CSI_ECC 0x64 + +#define UB953_REG_IND_ACC_CTL 0xb0 +#define UB953_REG_IND_ACC_ADDR 0xb1 +#define UB953_REG_IND_ACC_DATA 0xb2 + +#define UB953_REG_FPD3_RX_ID(n) (0xf0 + (n)) +#define UB953_REG_FPD3_RX_ID_LEN 6 + +/* Indirect register blocks */ +#define UB953_IND_TARGET_PAT_GEN 0x00 +#define UB953_IND_TARGET_FPD3_TX 0x01 +#define UB953_IND_TARGET_DIE_ID 0x02 + +#define UB953_IND_PGEN_CTL 0x01 +#define UB953_IND_PGEN_CTL_PGEN_ENABLE BIT(0) +#define UB953_IND_PGEN_CFG 0x02 +#define UB953_IND_PGEN_CSI_DI 0x03 +#define UB953_IND_PGEN_LINE_SIZE1 0x04 +#define UB953_IND_PGEN_LINE_SIZE0 0x05 +#define UB953_IND_PGEN_BAR_SIZE1 0x06 +#define UB953_IND_PGEN_BAR_SIZE0 0x07 +#define UB953_IND_PGEN_ACT_LPF1 0x08 +#define UB953_IND_PGEN_ACT_LPF0 0x09 +#define UB953_IND_PGEN_TOT_LPF1 0x0a +#define UB953_IND_PGEN_TOT_LPF0 0x0b +#define UB953_IND_PGEN_LINE_PD1 0x0c +#define UB953_IND_PGEN_LINE_PD0 0x0d +#define UB953_IND_PGEN_VBP 0x0e +#define UB953_IND_PGEN_VFP 0x0f +#define UB953_IND_PGEN_COLOR(n) (0x10 + (n)) /* n <= 15 */ + +#endif /* __MEDIA_I2C_DS90UB953_H__ */