From: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com
[ Upstream commit f0ce591dc9a97067c6e783a2eaccd22c5476144d ]
When the CMM is enabled, an offset of 25 pixels must be subtracted from the HDS (horizontal display start) and HDE (horizontal display end) registers. Fix the timings calculation, and take this into account in the mode validation.
This fixes a visible horizontal offset in the image with VGA monitors. HDMI monitors seem to be generally more tolerant to incorrect timings, but may be affected too.
Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 1b9738e44909d..065604c5837de 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -215,6 +215,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode; struct rcar_du_device *rcdu = rcrtc->dev; unsigned long mode_clock = mode->clock * 1000; + unsigned int hdse_offset; u32 dsmr; u32 escr;
@@ -298,10 +299,15 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) | DSMR_DIPM_DISP | DSMR_CSPM; rcar_du_crtc_write(rcrtc, DSMR, dsmr);
+ hdse_offset = 19; + if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2)) + hdse_offset += 25; + /* Display timings */ - rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19); + rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - + hdse_offset); rcar_du_crtc_write(rcrtc, HDER, mode->htotal - mode->hsync_start + - mode->hdisplay - 19); + mode->hdisplay - hdse_offset); rcar_du_crtc_write(rcrtc, HSWR, mode->hsync_end - mode->hsync_start - 1); rcar_du_crtc_write(rcrtc, HCR, mode->htotal - 1); @@ -831,6 +837,7 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc, struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc); struct rcar_du_device *rcdu = rcrtc->dev; bool interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE; + unsigned int min_sync_porch; unsigned int vbp;
if (interlaced && !rcar_du_has(rcdu, RCAR_DU_FEATURE_INTERLACED)) @@ -838,9 +845,14 @@ rcar_du_crtc_mode_valid(struct drm_crtc *crtc,
/* * The hardware requires a minimum combined horizontal sync and back - * porch of 20 pixels and a minimum vertical back porch of 3 lines. + * porch of 20 pixels (when CMM isn't used) or 45 pixels (when CMM is + * used), and a minimum vertical back porch of 3 lines. */ - if (mode->htotal - mode->hsync_start < 20) + min_sync_porch = 20; + if (rcrtc->group->cmms_mask & BIT(rcrtc->index % 2)) + min_sync_porch += 25; + + if (mode->htotal - mode->hsync_start < min_sync_porch) return MODE_HBLANK_NARROW;
vbp = (mode->vtotal - mode->vsync_end) / (interlaced ? 2 : 1);