From: Hans de Goede hdegoede@redhat.com
commit c8c2969bfcba5fcba3a5b078315c1b586d927d9f upstream.
The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode.
This is based on the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries.
Checking the Windows driver shows that it does always honor the VBT delays independent of the version of the VBT sequences.
Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") switched to a direct msleep() instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.
And now testing on a Nextbook Ares 8A shows that panel_on_delay must always be honored otherwise the panel will not turn on.
Instead of only always using regular msleep() for panel_on_delay do as Windows does and always use regular msleep() everywhere were intel_dsi_msleep() is used and drop the intel_dsi_msleep() helper.
Changes in v2: - Replace all intel_dsi_msleep() calls instead of just the intel_dsi_msleep(panel_on_delay) call
Cc: stable@vger.kernel.org Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence") Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoed... (cherry picked from commit fa83c12132f71302f7d4b02758dc0d46048d3f5f) Signed-off-by: Joonas Lahtinen joonas.lahtinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/i915/display/icl_dsi.c | 2 +- drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 11 ----------- drivers/gpu/drm/i915/display/intel_dsi_vbt.h | 1 - drivers/gpu/drm/i915/display/vlv_dsi.c | 22 +++++----------------- 4 files changed, 6 insertions(+), 30 deletions(-)
--- a/drivers/gpu/drm/i915/display/icl_dsi.c +++ b/drivers/gpu/drm/i915/display/icl_dsi.c @@ -1211,7 +1211,7 @@ static void gen11_dsi_powerup_panel(stru
/* panel power on related mipi dsi vbt sequences */ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON); - intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay); + msleep(intel_dsi->panel_on_delay); intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET); intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP); intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON); --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c @@ -762,17 +762,6 @@ void intel_dsi_vbt_exec_sequence(struct gpiod_set_value_cansleep(intel_dsi->gpio_backlight, 0); }
-void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec) -{ - struct intel_connector *connector = intel_dsi->attached_connector; - - /* For v3 VBTs in vid-mode the delays are part of the VBT sequences */ - if (is_vid_mode(intel_dsi) && connector->panel.vbt.dsi.seq_version >= 3) - return; - - msleep(msec); -} - void intel_dsi_log_params(struct intel_dsi *intel_dsi) { struct drm_i915_private *i915 = to_i915(intel_dsi->base.base.dev); --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.h +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.h @@ -16,7 +16,6 @@ void intel_dsi_vbt_gpio_init(struct inte void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi); void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi, enum mipi_seq seq_id); -void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec); void intel_dsi_log_params(struct intel_dsi *intel_dsi);
#endif /* __INTEL_DSI_VBT_H__ */ --- a/drivers/gpu/drm/i915/display/vlv_dsi.c +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c @@ -783,7 +783,6 @@ static void intel_dsi_pre_enable(struct { struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder); struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); - struct intel_connector *connector = to_intel_connector(conn_state->connector); struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); enum pipe pipe = crtc->pipe; enum port port; @@ -831,21 +830,10 @@ static void intel_dsi_pre_enable(struct if (!IS_GEMINILAKE(dev_priv)) intel_dsi_prepare(encoder, pipe_config);
+ /* Give the panel time to power-on and then deassert its reset */ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_ON); - - /* - * Give the panel time to power-on and then deassert its reset. - * Depending on the VBT MIPI sequences version the deassert-seq - * may contain the necessary delay, intel_dsi_msleep() will skip - * the delay in that case. If there is no deassert-seq, then an - * unconditional msleep is used to give the panel time to power-on. - */ - if (connector->panel.vbt.dsi.sequence[MIPI_SEQ_DEASSERT_RESET]) { - intel_dsi_msleep(intel_dsi, intel_dsi->panel_on_delay); - intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET); - } else { - msleep(intel_dsi->panel_on_delay); - } + msleep(intel_dsi->panel_on_delay); + intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DEASSERT_RESET);
if (IS_GEMINILAKE(dev_priv)) { glk_cold_boot = glk_dsi_enable_io(encoder); @@ -879,7 +867,7 @@ static void intel_dsi_pre_enable(struct msleep(20); /* XXX */ for_each_dsi_port(port, intel_dsi->ports) dpi_send_cmd(intel_dsi, TURN_ON, false, port); - intel_dsi_msleep(intel_dsi, 100); + msleep(100);
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_DISPLAY_ON);
@@ -1007,7 +995,7 @@ static void intel_dsi_post_disable(struc /* Assert reset */ intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_ASSERT_RESET);
- intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay); + msleep(intel_dsi->panel_off_delay); intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
intel_dsi->panel_power_off_time = ktime_get_boottime();