The qup_i2c_xfer_v2() calls the qup_i2c_change_state() but does not check its return value. A proper implementation can be found in qup_i2c_xfer().
Add error handling for qup_i2c_change_state(). If the function fails, return the error code.
Fixes: 7545c7dba169 ("i2c: qup: reorganization of driver code to remove polling for qup v2") Cc: stable@vger.kernel.org # v4.17 Signed-off-by: Wentao Liang vulab@iscas.ac.cn --- drivers/i2c/busses/i2c-qup.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index da20b4487c9a..2477f570fe86 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -1538,7 +1538,7 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, int num) { struct qup_i2c_dev *qup = i2c_get_adapdata(adap); - int ret, idx = 0; + int ret, err, idx = 0;
qup->bus_err = 0; qup->qup_err = 0; @@ -1588,7 +1588,9 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, ret = qup_i2c_bus_active(qup, ONE_BYTE);
if (!ret) - qup_i2c_change_state(qup, QUP_RESET_STATE); + err = qup_i2c_change_state(qup, QUP_RESET_STATE); + if (err) + return err;
if (ret == 0) ret = num;