In the AD7195 documentation, the AC excitation enable bit is on position 22 in the Configuration register.
Note that the fix tag is for the commit that moved the driver out of staging.
Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Alisa Roman alisa.roman@analog.com Cc: stable@vger.kernel.org Cc: alisadariana@gmail.com --- drivers/iio/adc/ad7192.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index 8685e0b58a83..7bc3ebfe8081 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -62,7 +62,6 @@ #define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */ #define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */ #define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */ -#define AD7192_MODE_ACX BIT(14) /* AC excitation enable(AD7195 only)*/ #define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */ #define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/ #define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */ @@ -91,6 +90,7 @@ /* Configuration Register Bit Designations (AD7192_REG_CONF) */
#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */ +#define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */ #define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */ #define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */ #define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */ @@ -472,7 +472,7 @@ static ssize_t ad7192_show_ac_excitation(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7192_state *st = iio_priv(indio_dev);
- return sysfs_emit(buf, "%d\n", !!(st->mode & AD7192_MODE_ACX)); + return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX)); }
static ssize_t ad7192_show_bridge_switch(struct device *dev, @@ -513,13 +513,13 @@ static ssize_t ad7192_set(struct device *dev,
ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon); break; - case AD7192_REG_MODE: + case AD7192_REG_CONF: if (val) - st->mode |= AD7192_MODE_ACX; + st->conf |= AD7192_CONF_ACX; else - st->mode &= ~AD7192_MODE_ACX; + st->conf &= ~AD7192_CONF_ACX;
- ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode); + ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf); break; default: ret = -EINVAL; @@ -579,12 +579,11 @@ static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
static IIO_DEVICE_ATTR(ac_excitation_en, 0644, ad7192_show_ac_excitation, ad7192_set, - AD7192_REG_MODE); + AD7192_REG_CONF);
static struct attribute *ad7192_attributes[] = { &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, - &iio_dev_attr_ac_excitation_en.dev_attr.attr, NULL };
@@ -595,6 +594,7 @@ static const struct attribute_group ad7192_attribute_group = { static struct attribute *ad7195_attributes[] = { &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr, &iio_dev_attr_bridge_switch_en.dev_attr.attr, + &iio_dev_attr_ac_excitation_en.dev_attr.attr, NULL };