From: Mario Limonciello mario.limonciello@amd.com
On systems that only have an SRA sensor connected to SFH the sensor doesn't get enabled due to a bad optimization condition of breaking the sensor walk loop.
This optimization is unnecessary in the first place because if there is only one device then the loop only runs once. Drop the condition and explicitly mark sensor as enabled.
Reported-by: Yijun Shen Yijun.Shen@dell.com Tested-By: Yijun Shen Yijun_Shen@Dell.com Fixes: d1c444b47100d ("HID: amd_sfh: Add support to export device operating states") Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello mario.limonciello@amd.com --- v2: * Add tag --- drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c index 25f0ebfcbd5f5..c1bdf1e0d44af 100644 --- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c +++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c @@ -134,9 +134,6 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata) for (i = 0; i < cl_data->num_hid_devices; i++) { cl_data->sensor_sts[i] = SENSOR_DISABLED;
- if (cl_data->num_hid_devices == 1 && cl_data->sensor_idx[0] == SRA_IDX) - break; - if (cl_data->sensor_idx[i] == SRA_IDX) { info.sensor_idx = cl_data->sensor_idx[i]; writel(0, privdata->mmio + amd_get_p2c_val(privdata, 0)); @@ -145,8 +142,10 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata) (privdata, cl_data->sensor_idx[i], ENABLE_SENSOR);
cl_data->sensor_sts[i] = (status == 0) ? SENSOR_ENABLED : SENSOR_DISABLED; - if (cl_data->sensor_sts[i] == SENSOR_ENABLED) + if (cl_data->sensor_sts[i] == SENSOR_ENABLED) { + cl_data->is_any_sensor_enabled = true; privdata->dev_en.is_sra_present = true; + } continue; }