From: Josh Poimboeuf jpoimboe@kernel.org
commit 8bd200d23ec42d66ccd517a72dd0b9cc6132d2fd upstream.
Move the vmx_vm{enter,exit}() functionality into __vmx_vcpu_run(). This will make it easier to do the spec_ctrl handling before the first RET.
Signed-off-by: Josh Poimboeuf jpoimboe@kernel.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Borislav Petkov bp@suse.de [cascardo: remove ENDBR] Signed-off-by: Thadeu Lima de Souza Cascardo cascardo@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/vmx/vmenter.S | 118 +++++++++++++++++---------------------------- 1 file changed, 45 insertions(+), 73 deletions(-)
--- a/arch/x86/kvm/vmx/vmenter.S +++ b/arch/x86/kvm/vmx/vmenter.S @@ -31,68 +31,6 @@ .section .noinstr.text, "ax"
/** - * vmx_vmenter - VM-Enter the current loaded VMCS - * - * %RFLAGS.ZF: !VMCS.LAUNCHED, i.e. controls VMLAUNCH vs. VMRESUME - * - * Returns: - * %RFLAGS.CF is set on VM-Fail Invalid - * %RFLAGS.ZF is set on VM-Fail Valid - * %RFLAGS.{CF,ZF} are cleared on VM-Success, i.e. VM-Exit - * - * Note that VMRESUME/VMLAUNCH fall-through and return directly if - * they VM-Fail, whereas a successful VM-Enter + VM-Exit will jump - * to vmx_vmexit. - */ -SYM_FUNC_START_LOCAL(vmx_vmenter) - /* EFLAGS.ZF is set if VMCS.LAUNCHED == 0 */ - je 2f - -1: vmresume - RET - -2: vmlaunch - RET - -3: cmpb $0, kvm_rebooting - je 4f - RET -4: ud2 - - _ASM_EXTABLE(1b, 3b) - _ASM_EXTABLE(2b, 3b) - -SYM_FUNC_END(vmx_vmenter) - -/** - * vmx_vmexit - Handle a VMX VM-Exit - * - * Returns: - * %RFLAGS.{CF,ZF} are cleared on VM-Success, i.e. VM-Exit - * - * This is vmx_vmenter's partner in crime. On a VM-Exit, control will jump - * here after hardware loads the host's state, i.e. this is the destination - * referred to by VMCS.HOST_RIP. - */ -SYM_FUNC_START(vmx_vmexit) -#ifdef CONFIG_RETPOLINE - ALTERNATIVE "jmp .Lvmexit_skip_rsb", "", X86_FEATURE_RETPOLINE - /* Preserve guest's RAX, it's used to stuff the RSB. */ - push %_ASM_AX - - /* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */ - FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE - - /* Clear RFLAGS.CF and RFLAGS.ZF to preserve VM-Exit, i.e. !VM-Fail. */ - or $1, %_ASM_AX - - pop %_ASM_AX -.Lvmexit_skip_rsb: -#endif - RET -SYM_FUNC_END(vmx_vmexit) - -/** * __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode * @vmx: struct vcpu_vmx * (forwarded to vmx_update_host_rsp) * @regs: unsigned long * (to guest registers) @@ -124,8 +62,7 @@ SYM_FUNC_START(__vmx_vcpu_run) /* Copy @launched to BL, _ASM_ARG3 is volatile. */ mov %_ASM_ARG3B, %bl
- /* Adjust RSP to account for the CALL to vmx_vmenter(). */ - lea -WORD_SIZE(%_ASM_SP), %_ASM_ARG2 + lea (%_ASM_SP), %_ASM_ARG2 call vmx_update_host_rsp
/* Load @regs to RAX. */ @@ -154,11 +91,36 @@ SYM_FUNC_START(__vmx_vcpu_run) /* Load guest RAX. This kills the @regs pointer! */ mov VCPU_RAX(%_ASM_AX), %_ASM_AX
- /* Enter guest mode */ - call vmx_vmenter + /* Check EFLAGS.ZF from 'testb' above */ + je .Lvmlaunch
- /* Jump on VM-Fail. */ - jbe 2f + /* + * After a successful VMRESUME/VMLAUNCH, control flow "magically" + * resumes below at 'vmx_vmexit' due to the VMCS HOST_RIP setting. + * So this isn't a typical function and objtool needs to be told to + * save the unwind state here and restore it below. + */ + UNWIND_HINT_SAVE + +/* + * If VMRESUME/VMLAUNCH and corresponding vmexit succeed, execution resumes at + * the 'vmx_vmexit' label below. + */ +.Lvmresume: + vmresume + jmp .Lvmfail + +.Lvmlaunch: + vmlaunch + jmp .Lvmfail + + _ASM_EXTABLE(.Lvmresume, .Lfixup) + _ASM_EXTABLE(.Lvmlaunch, .Lfixup) + +SYM_INNER_LABEL(vmx_vmexit, SYM_L_GLOBAL) + + /* Restore unwind state from before the VMRESUME/VMLAUNCH. */ + UNWIND_HINT_RESTORE
/* Temporarily save guest's RAX. */ push %_ASM_AX @@ -185,9 +147,13 @@ SYM_FUNC_START(__vmx_vcpu_run) mov %r15, VCPU_R15(%_ASM_AX) #endif
+ /* IMPORTANT: RSB must be stuffed before the first return. */ + FILL_RETURN_BUFFER %_ASM_BX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE + /* Clear RAX to indicate VM-Exit (as opposed to VM-Fail). */ xor %eax, %eax
+.Lclear_regs: /* * Clear all general purpose registers except RSP and RAX to prevent * speculative use of the guest's values, even those that are reloaded @@ -197,7 +163,7 @@ SYM_FUNC_START(__vmx_vcpu_run) * free. RSP and RAX are exempt as RSP is restored by hardware during * VM-Exit and RAX is explicitly loaded with 0 or 1 to return VM-Fail. */ -1: xor %ecx, %ecx + xor %ecx, %ecx xor %edx, %edx xor %ebx, %ebx xor %ebp, %ebp @@ -216,8 +182,8 @@ SYM_FUNC_START(__vmx_vcpu_run)
/* "POP" @regs. */ add $WORD_SIZE, %_ASM_SP - pop %_ASM_BX
+ pop %_ASM_BX #ifdef CONFIG_X86_64 pop %r12 pop %r13 @@ -230,9 +196,15 @@ SYM_FUNC_START(__vmx_vcpu_run) pop %_ASM_BP RET
- /* VM-Fail. Out-of-line to avoid a taken Jcc after VM-Exit. */ -2: mov $1, %eax - jmp 1b +.Lfixup: + cmpb $0, kvm_rebooting + jne .Lvmfail + ud2 +.Lvmfail: + /* VM-Fail: set return value to 1 */ + mov $1, %eax + jmp .Lclear_regs + SYM_FUNC_END(__vmx_vcpu_run)