From: Kai-Heng Feng kai.heng.feng@canonical.com
[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ]
This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057
Signed-off-by: Kai-Heng Feng kai.heng.feng@canonical.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 10 ++++++++++ drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 395b057014809..a1fab77b2096a 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1429,6 +1429,16 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) else phy_reg |= 0xFA; e1e_wphy_locked(hw, I217_PLL_CLOCK_GATE_REG, phy_reg); + + if (speed == SPEED_1000) { + hw->phy.ops.read_reg_locked(hw, HV_PM_CTRL, + &phy_reg); + + phy_reg |= HV_PM_CTRL_K1_CLK_REQ; + + hw->phy.ops.write_reg_locked(hw, HV_PM_CTRL, + phy_reg); + } } hw->phy.ops.release(hw);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index eb09c755fa172..1502895eb45dd 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -210,7 +210,7 @@
/* PHY Power Management Control */ #define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 +#define HV_PM_CTRL_K1_CLK_REQ 0x200 #define HV_PM_CTRL_K1_ENABLE 0x4000
#define I217_PLL_CLOCK_GATE_REG PHY_REG(772, 28)