From: Robert Schlabbach robert_s@gmx.net
[ Upstream commit 271225fd57c2f1e0b3f8826df51be6c634affefe ]
Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list:
https://sourceforge.net/p/e1000/mailman/message/37106269/
However, the suppression was not documented at all, nor was how to enable NBASE-T support.
Properly document the NBASE-T suppression and how to enable NBASE-T support.
Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach robert_s@gmx.net Signed-off-by: Robert Schlabbach robert_s@gmx.net Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../device_drivers/ethernet/intel/ixgbe.rst | 16 ++++++++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++++ 2 files changed, 20 insertions(+)
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst b/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst index f1d5233e5e510..0a233b17c664e 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst @@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in a virtual function (VF), jumbo frames must first be enabled in the physical function (PF). The VF MTU setting cannot be larger than the PF MTU.
+NBASE-T Support +--------------- +The ixgbe driver supports NBASE-T on some devices. However, the advertisement +of NBASE-T speeds is suppressed by default, to accommodate broken network +switches which cannot cope with advertised NBASE-T speeds. Use the ethtool +command to enable advertising NBASE-T speeds on devices which support it:: + + ethtool -s eth? advertise 0x1800000001028 + +On Linux systems with INTERFACES(5), this can be specified as a pre-up command +in /etc/network/interfaces so that the interface is always brought up with +NBASE-T support, e.g.:: + + iface eth? inet dhcp + pre-up ethtool -s eth? advertise 0x1800000001028 || true + Generic Receive Offload, aka GRO -------------------------------- The driver supports the in-kernel software implementation of GRO. GRO has diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index ffe322136c584..a3a02e2f92f64 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5532,6 +5532,10 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) if (!speed && hw->mac.ops.get_link_capabilities) { ret = hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); + /* remove NBASE-T speeds from default autonegotiation + * to accommodate broken network switches in the field + * which cannot cope with advertised NBASE-T speeds + */ speed &= ~(IXGBE_LINK_SPEED_5GB_FULL | IXGBE_LINK_SPEED_2_5GB_FULL); }