From: Guenter Roeck linux@roeck-us.net
commit da7dc0568491104c7acb632e9d41ddce9aaabbb1 upstream.
Tests with a real chip and a closer look into the datasheet reveals that the local and remote critical alarm status bits are swapped for MAX6680/MAX6681.
Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwmon/lm90.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -190,6 +190,7 @@ enum chips { lm90, adm1032, lm99, lm86, #define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/ #define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */ #define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */ +#define LM90_HAVE_CRIT_ALRM_SWP (1 << 11)/* critical alarm bits swapped */
/* LM90 status */ #define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */ @@ -415,7 +416,8 @@ static const struct lm90_params lm90_par .reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL, }, [max6680] = { - .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT, + .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT + | LM90_HAVE_CRIT_ALRM_SWP, .alert_alarms = 0x7c, .max_convrate = 7, }, @@ -1191,6 +1193,7 @@ static const u8 lm90_temp_emerg_index[3] static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 }; static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 }; static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 }; +static const u8 lm90_crit_alarm_bits_swapped[3] = { 1, 0, 9 }; static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 }; static const u8 lm90_fault_bits[3] = { 0, 2, 10 };
@@ -1216,7 +1219,10 @@ static int lm90_temp_read(struct device *val = (data->alarms >> lm90_max_alarm_bits[channel]) & 1; break; case hwmon_temp_crit_alarm: - *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1; + if (data->flags & LM90_HAVE_CRIT_ALRM_SWP) + *val = (data->alarms >> lm90_crit_alarm_bits_swapped[channel]) & 1; + else + *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1; break; case hwmon_temp_emergency_alarm: *val = (data->alarms >> lm90_emergency_alarm_bits[channel]) & 1;