4.19-stable review patch. If anyone has any objections, please let me know.
------------------
From: Szuying Chen chensiying21@gmail.com
[ Upstream commit 737dd811a3dbfd7edd4ad2ba5152e93d99074f83 ]
When a CRC error occurs, the HBA asserts an interrupt to indicate an interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then does error recovery. If the adapter receives another SDB FIS with an error (PxIS.TFES) from the device before the start of the EH recovery process, the interrupt signaling the new SDB cannot be serviced as PxIE was cleared already. This in turn results in the HBA inability to issue any command during the error recovery process after setting PxCMD.ST to 1 because PxIS.TFES is still set.
According to AHCI 1.3.1 specifications section 6.2.2, fatal errors notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will cause the HBA to enter the ERR:Fatal state. In this state, the HBA shall not issue any new commands.
To avoid this situation, introduce the function ahci_port_clear_pending_irq() to clear pending interrupts before executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2 specification.
Signed-off-by: Szuying Chen Chloe_Chen@asmedia.com.tw Fixes: e0bfd149973d ("[PATCH] ahci: stop engine during hard reset") Cc: stable@vger.kernel.org Reviewed-by: Niklas Cassel niklas.cassel@wdc.com Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libahci.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 00eef92e91e57..b93fad6939dac 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1210,6 +1210,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) return sprintf(buf, "%d\n", emp->blink_policy); }
+static void ahci_port_clear_pending_irq(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT); +} + static void ahci_port_init(struct device *dev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) @@ -1224,18 +1244,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap, if (rc) dev_warn(dev, "%s (%d)\n", emsg, rc);
- /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - dev_dbg(dev, "PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - dev_dbg(dev, "PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << port_no, mmio + HOST_IRQ_STAT); + ahci_port_clear_pending_irq(ap);
/* mark esata ports */ tmp = readl(port_mmio + PORT_CMD); @@ -1565,6 +1574,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, tf.command = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+ ahci_port_clear_pending_irq(ap); + rc = sata_link_hardreset(link, timing, deadline, online, ahci_check_ready);