From: Serge Semin Sergey.Semin@baikalelectronics.ru
[ Upstream commit e9f3f8f488005f6da3cfb66070706770ecaef747 ]
commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin Sergey.Semin@baikalelectronics.ru Signed-off-by: Keguang Zhang keguang.zhang@gmail.com Tested-by: Keguang Zhang keguang.zhang@gmail.com Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/loongson32/common/platform.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index 794c96c2a4cd..311dc1580bbd 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) if (plat_dat->bus_id) { __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 | GMAC1_USE_UART0, LS1X_MUX_CTRL0); - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23); break; @@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC1_SHUT; } else { - switch (plat_dat->interface) { + switch (plat_dat->phy_interface) { case PHY_INTERFACE_MODE_RGMII: val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01); break; @@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) break; default: pr_err("unsupported mii mode %d\n", - plat_dat->interface); + plat_dat->phy_interface); return -ENOTSUPP; } val &= ~GMAC0_SHUT; @@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv) plat_dat = dev_get_platdata(&pdev->dev);
val &= ~PHY_INTF_SELI; - if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) + if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII) val |= 0x4 << PHY_INTF_SELI_SHIFT; __raw_writel(val, LS1X_MUX_CTRL1);
@@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = { .bus_id = 0, .phy_addr = -1, #if defined(CONFIG_LOONGSON1_LS1B) - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, #elif defined(CONFIG_LOONGSON1_LS1C) - .interface = PHY_INTERFACE_MODE_RMII, + .phy_interface = PHY_INTERFACE_MODE_RMII, #endif .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, @@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = { static struct plat_stmmacenet_data ls1x_eth1_pdata = { .bus_id = 1, .phy_addr = -1, - .interface = PHY_INTERFACE_MODE_MII, + .phy_interface = PHY_INTERFACE_MODE_MII, .mdio_bus_data = &ls1x_mdio_bus_data, .dma_cfg = &ls1x_eth_dma_cfg, .has_gmac = 1,