From: Sivaprakash Murugesan sivaprak@codeaurora.org
commit afd55e6d1bd35b4b36847869011447a83a81c8e0 upstream.
There were some problem in ipq8074 Gen2 PCIe phy init sequence.
1. Few register values were wrongly updated in the phy init sequence. 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter register which is added in serdes table causing the wrong register was getting updated. 3. Clocks and resets were not added in the phy init.
Fix these to make Gen2 PCIe port on ipq8074 devices to work.
Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074") Cc: stable@vger.kernel.org Co-developed-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Selvam Sathappan Periakaruppan speriaka@codeaurora.org Signed-off-by: Sivaprakash Murugesan sivaprak@codeaurora.org Link: https://lore.kernel.org/r/1596036607-11877-4-git-send-email-sivaprak@codeaur... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++------- drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 11 insertions(+), 7 deletions(-)
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -402,8 +402,8 @@ static const struct qmp_phy_init_tbl ipq QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f), QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6), QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf), QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0), @@ -429,7 +429,6 @@ static const struct qmp_phy_init_tbl ipq QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0), QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1), - QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1), @@ -438,7 +437,6 @@ static const struct qmp_phy_init_tbl ipq QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f), QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19), - QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7), };
static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = { @@ -446,6 +444,8 @@ static const struct qmp_phy_init_tbl ipq QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6), QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2), QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36), + QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a), };
static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = { @@ -456,7 +456,6 @@ static const struct qmp_phy_init_tbl ipq QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4), - QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4), };
static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { @@ -1107,6 +1106,9 @@ static const struct qmp_phy_cfg msm8996_ .pwrdn_ctrl = SW_PWRDN, };
+static const char * const ipq8074_pciephy_clk_l[] = { + "aux", "cfg_ahb", +}; /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1124,8 +1126,8 @@ static const struct qmp_phy_cfg ipq8074_ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl), .pcs_tbl = ipq8074_pcie_pcs_tbl, .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl), - .clk_list = NULL, - .num_clks = 0, + .clk_list = ipq8074_pciephy_clk_l, + .num_clks = ARRAY_SIZE(ipq8074_pciephy_clk_l), .reset_list = ipq8074_pciephy_reset_l, .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -77,6 +77,8 @@ #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc
/* Only for QMP V2 PHY - TX registers */ +#define QSERDES_TX_EMP_POST1_LVL 0x018 +#define QSERDES_TX_SLEW_CNTL 0x040 #define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 #define QSERDES_TX_DEBUG_BUS_SEL 0x064 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068