[PATCH 5.18 0239/1095] ARM: dts: qcom-msm8974: Sort and clean up nodes

From: Konrad Dybcio konrad.dybcio@somainline.org

[ Upstream commit f300826d27be7f7f671c922bf57007c98c683590 ]

- Remove regulators from the SoC DTSI - cpu_pmu{} -> pmu{} - move modem/iris regulators out of here; only FP2 used them - tcsr_mutex is moved out of /soc

Signed-off-by: Konrad Dybcio konrad.dybcio@somainline.org [bjorn: Rebased on top of Krzysztof's fixes] Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220415115633.575010-18-konrad.dybcio@somainline.... Signed-off-by: Sasha Levin sashal@kernel.org --- .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 4 + .../boot/dts/qcom-msm8974-fairphone-fp2.dts | 12 + .../qcom-msm8974-lge-nexus5-hammerhead.dts | 7 + .../dts/qcom-msm8974-sony-xperia-castor.dts | 4 + .../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 6 + arch/arm/boot/dts/qcom-msm8974.dtsi | 1414 ++++++++--------- 6 files changed, 709 insertions(+), 738 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index f114debe4d95..f47020cf7a90 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -61,6 +61,8 @@ phy@b {

&rpm_requests { pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + pm8841_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; @@ -83,6 +85,8 @@ pm8841_s4: s4 { };

pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index 38e48ea021d9..d6799a1b820b 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -109,10 +109,18 @@ &pronto {

vddmx-supply = <&pm8841_s1>; vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>;

pinctrl-names = "default"; pinctrl-0 = <&wcnss_pin_a>;

+ iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + smd-edge { qcom,remote-pid = <4>; label = "pronto"; @@ -125,6 +133,8 @@ wcnss {

&rpm_requests { pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + pm8841_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; @@ -142,6 +152,8 @@ pm8841_s3: s3 { };

pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index a1cae3d453c2..6537950c30ba 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -334,6 +334,8 @@ otg {

&rpm_requests { pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + pm8841_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; @@ -356,6 +358,8 @@ pm8841_s4: s4 { };

pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; @@ -517,6 +521,9 @@ pm8941_l24: l24 { regulator-max-microvolt = <3075000>; regulator-boot-on; }; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs3: lvs3 {}; }; };

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts index 687f6149268c..b8b6447b3217 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -304,6 +304,8 @@ lcd_dcdc_en_pin_a: lcd-dcdc-en-active {

&rpm_requests { pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; @@ -465,6 +467,8 @@ pm8941_l24: l24 { regulator-max-microvolt = <3075000>; regulator-boot-on; }; + + pm8941_lvs3: lvs3 {}; }; };

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index 87ec3694add9..870e0aeb4d05 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -153,6 +153,8 @@ &pm8941_wled {

&rpm_requests { pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + pm8841_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; @@ -175,6 +177,8 @@ pm8841_s4: s4 { };

pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l1_l3-supply = <&pm8941_s1>; vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; vdd_l4_l11-supply = <&pm8941_s1>; @@ -335,6 +339,8 @@ pm8941_l24: l24 { regulator-max-microvolt = <3075000>; regulator-boot-on; }; + + pm8941_lvs3: lvs3 {}; }; };

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index e6c9782e4670..0091a4c29fff 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -16,57 +16,17 @@ / { compatible = "qcom,msm8974"; interrupt-parent = <&intc>;

- reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - mpss_region: mpss@8000000 { - reg = <0x08000000 0x5100000>; - no-map; - }; - - mba_region: mba@d100000 { - reg = <0x0d100000 0x100000>; - no-map; - }; - - wcnss_region: wcnss@d200000 { - reg = <0x0d200000 0xa00000>; - no-map; - }; - - adsp_region: adsp@dc00000 { - reg = <0x0dc00000 0x1900000>; - no-map; - }; - - venus@f500000 { - reg = <0x0f500000 0x500000>; - no-map; - }; - - smem_region: smem@fa00000 { - reg = <0xfa00000 0x200000>; - no-map; - }; - - tz@fc00000 { - reg = <0x0fc00000 0x160000>; - no-map; - }; - - rfsa@fd60000 { - reg = <0x0fd60000 0x20000>; - no-map; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; };

- rmtfs@fd80000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0fd80000 0x180000>; - no-map; - - qcom,client-id = <1>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; };

@@ -136,211 +96,78 @@ CPU_SPC: spc { }; };

+ firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + memory { device_type = "memory"; reg = <0x0 0x0>; };

- thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; - - trips { - cpu_alert0: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit0: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; - - trips { - cpu_alert1: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit1: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + pmu { + compatible = "qcom,krait-pmu"; + interrupts = <GIC_PPI 7 0xf04>; + };

- thermal-sensors = <&tsens 7>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges;

- trips { - cpu_alert2: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit2: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + mpss_region: mpss@8000000 { + reg = <0x08000000 0x5100000>; + no-map; };

- cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; - - trips { - cpu_alert3: trip0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit3: trip1 { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + mba_region: mba@d100000 { + reg = <0x0d100000 0x100000>; + no-map; };

- q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 1>; - - trips { - q6_dsp_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0xa00000>; + no-map; };

- modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 2>; - - trips { - modemtx_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1900000>; + no-map; };

- video-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 3>; - - trips { - video_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: memory@f500000 { + reg = <0x0f500000 0x500000>; + no-map; };

- wlan-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; - - trips { - wlan_alert0: trip-point0 { - temperature = <105000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; };

- gpu-top-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; - - trips { - gpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + tz_region: memory@fc00000 { + reg = <0x0fc00000 0x160000>; + no-map; };

- gpu-bottom-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; - - trips { - gpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + rfsa_mem: memory@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = <GIC_PPI 7 0xf04>; - };

- clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map;

- sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + qcom,client-id = <1>; }; };

- timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 2 0xf08>, - <GIC_PPI 3 0xf08>, - <GIC_PPI 4 0xf08>, - <GIC_PPI 1 0xf08>; - clock-frequency = <19200000>; - }; - smem { compatible = "qcom,smem";

@@ -467,11 +294,23 @@ wcnss_smsm: wcnss@7 { }; };

- firmware { - scm { - compatible = "qcom,scm"; - clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; - clock-names = "core", "bus", "iface"; + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; }; };

@@ -494,31 +333,6 @@ apcs: syscon@f9011000 { reg = <0xf9011000 0x1000>; };

- qfprom: qfprom@fc4bc000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "qcom,qfprom"; - reg = <0xfc4bc000 0x1000>; - tsens_calib: calib@d0 { - reg = <0xd0 0x18>; - }; - tsens_backup: backup@440 { - reg = <0x440 0x10>; - }; - }; - - tsens: thermal-sensor@fc4a9000 { - compatible = "qcom,msm8974-tsens"; - reg = <0xfc4a9000 0x1000>, /* TM */ - <0xfc4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_calib>, <&tsens_backup>; - nvmem-cell-names = "calib", "calib_backup"; - #qcom,sensors = <11>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; - #thermal-sensor-cells = <1>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -624,94 +438,6 @@ acc3: clock-controller@f90b8000 { reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; };

- restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x4000>; - }; - - tcsr: syscon@fd4a0000 { - compatible = "syscon"; - reg = <0xfd4a0000 0x10000>; - }; - - tcsr_mutex_block: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; - - mmcc: clock-controller@fd8c0000 { - compatible = "qcom,mmcc-msm8974"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfd8c0000 0x6000>; - }; - - tcsr_mutex: tcsr-mutex { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_block 0 0x80>; - - #hwlock-cells = <1>; - }; - - rpm_msg_ram: memory@fc428000 { - compatible = "qcom,rpm-msg-ram"; - reg = <0xfc428000 0x4000>; - }; - - blsp1_uart1: serial@f991d000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991d000 0x1000>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart1: serial@f995d000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995d000 0x1000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; - clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart2: serial@f995e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf995e000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - - blsp2_uart4: serial@f9960000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf9960000 0x1000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - sdhc_1: sdhci@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -758,182 +484,25 @@ sdhc_2: sdhci@f98a4900 { clock-names = "core", "iface", "xo"; bus-width = <4>;

- status = "disabled"; - }; - - otg: usb@f9a55000 { - compatible = "qcom,ci-hdrc"; - reg = <0xf9a55000 0x200>, - <0xf9a55200 0x200>; - interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_USB_HS_AHB_CLK>, - <&gcc GCC_USB_HS_SYSTEM_CLK>; - clock-names = "iface", "core"; - assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; - assigned-clock-rates = <75000000>; - resets = <&gcc GCC_USB_HS_BCR>; - reset-names = "core"; - phy_type = "ulpi"; - dr_mode = "otg"; - ahb-burst-config = <0>; - phy-names = "usb-phy"; - status = "disabled"; - #reset-cells = <1>; - - ulpi { - usb_hs1_phy: phy@a { - compatible = "qcom,usb-hs-phy-msm8974", - "qcom,usb-hs-phy"; - #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; - clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; - reset-names = "phy", "por"; - status = "disabled"; - }; - - usb_hs2_phy: phy@b { - compatible = "qcom,usb-hs-phy-msm8974", - "qcom,usb-hs-phy"; - #phy-cells = <0>; - clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; - clock-names = "ref", "sleep"; - resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; - reset-names = "phy", "por"; - status = "disabled"; - }; - }; - }; - - rng@f9bff000 { - compatible = "qcom,prng"; - reg = <0xf9bff000 0x200>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; - clock-names = "core"; - }; - - remoteproc_mss: remoteproc@fc880000 { - compatible = "qcom,msm8974-mss-pil"; - reg = <0xfc880000 0x100>, <0xfc820000 0x020>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>, - <&xo_board>; - clock-names = "iface", "bus", "mem", "xo"; - - resets = <&gcc GCC_MSS_RESTART>; - reset-names = "mss_restart"; - - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; - - qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - mba { - memory-region = <&mba_region>; - }; - - mpss { - memory-region = <&mpss_region>; - }; - - smd-edge { - interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 12>; - qcom,smd-edge = <0>; - - label = "modem"; - }; - }; - - pronto: remoteproc@fb21b000 { - compatible = "qcom,pronto-v2-pil", "qcom,pronto"; - reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; - reg-names = "ccu", "dxe", "pmu"; - - memory-region = <&wcnss_region>; - - interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; - - vddpx-supply = <&pm8941_s3>; - - qcom,smem-states = <&wcnss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - iris { - compatible = "qcom,wcn3680"; - - clocks = <&rpmcc RPM_SMD_CXO_A2>; - clock-names = "xo"; - - vddxo-supply = <&pm8941_l6>; - vddrfa-supply = <&pm8941_l11>; - vddpa-supply = <&pm8941_l19>; - vdddig-supply = <&pm8941_s3>; - }; - - smd-edge { - interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - - qcom,ipc = <&apcs 8 17>; - qcom,smd-edge = <6>; - - wcnss { - compatible = "qcom,wcnss"; - qcom,smd-channels = "WCNSS_CTRL"; - status = "disabled"; - - qcom,mmio = <&pronto>; - - bt { - compatible = "qcom,wcnss-bt"; - }; - - wifi { - compatible = "qcom,wcnss-wlan"; - - interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "tx", "rx"; + status = "disabled"; + };

- qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; - qcom,smem-state-names = "tx-enable", "tx-rings-empty"; - }; - }; - }; + blsp1_uart1: serial@f991d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991d000 0x1000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; };

- tlmm: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; };

blsp1_i2c1: i2c@f9923000 { @@ -980,6 +549,43 @@ blsp1_i2c6: i2c@f9928000 { #size-cells = <0>; };

+ blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp2_uart1: serial@f995d000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995d000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart4: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_i2c2: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; @@ -1015,93 +621,110 @@ blsp2_i2c6: i2c@f9968000 { #size-cells = <0>; };

- spmi_bus: spmi@fc4cf000 { - compatible = "qcom,spmi-pmic-arb"; - reg-names = "core", "intr", "cnfg"; - reg = <0xfc4cf000 0x1000>, - <0xfc4cb000 0x1000>, - <0xfc4ca000 0x1000>; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; + otg: usb@f9a55000 { + compatible = "qcom,ci-hdrc"; + reg = <0xf9a55000 0x200>, + <0xf9a55200 0x200>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <75000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + status = "disabled"; + #reset-cells = <1>; + + ulpi { + usb_hs1_phy: phy@a { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>; + reset-names = "phy", "por"; + status = "disabled"; + }; + + usb_hs2_phy: phy@b { + compatible = "qcom,usb-hs-phy-msm8974", + "qcom,usb-hs-phy"; + #phy-cells = <0>; + clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>; + reset-names = "phy", "por"; + status = "disabled"; + }; + }; };

- blsp2_dma: dma-controller@f9944000 { - compatible = "qcom,bam-v1.4.0"; - reg = <0xf9944000 0x19000>; - interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; + rng@f9bff000 { + compatible = "qcom,prng"; + reg = <0xf9bff000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; };

- etr@fc322000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0xfc322000 0x1000>; + pronto: remoteproc@fb21b000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu";

- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; + memory-region = <&wcnss_region>;

- in-ports { - port { - etr_in: endpoint { - remote-endpoint = <&replicator_out0>; - }; - }; - }; - }; + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";

- tpiu@fc318000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0xfc318000 0x1000>; + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop";

- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; + status = "disabled";

- in-ports { - port { - tpiu_in: endpoint { - remote-endpoint = <&replicator_out1>; - }; - }; + iris { + compatible = "qcom,wcn3680"; + + clocks = <&rpmcc RPM_SMD_CXO_A2>; + clock-names = "xo"; }; - };

- replicator@fc31c000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0xfc31c000 0x1000>; + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;

- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; - clock-names = "apb_pclk", "atclk"; + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>;

- out-ports { - #address-cells = <1>; - #size-cells = <0>; + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + status = "disabled";

- port@0 { - reg = <0>; - replicator_out0: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - port@1 { - reg = <1>; - replicator_out1: endpoint { - remote-endpoint = <&tpiu_in>; + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; }; - }; - };

- in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&etf_out>; + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; }; }; }; @@ -1131,37 +754,19 @@ etf_in: endpoint { }; };

- funnel@fc31b000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc31b000 0x1000>; + tpiu@fc318000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0xfc318000 0x1000>;

clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk";

in-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* - * Not described input ports: - * 0 - connected trought funnel to Audio, Modem and - * Resource and Power Manager CPU's - * 2...7 - not-connected - */ - port@1 { - reg = <1>; - merger_in1: endpoint { - remote-endpoint = <&funnel1_out>; - }; - }; - }; - - out-ports { port { - merger_out: endpoint { - remote-endpoint = <&etf_in>; + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; }; - }; + }; }; };

@@ -1203,9 +808,9 @@ funnel1_out: endpoint { }; };

- funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ + funnel@fc31b000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0xfc345000 0x1000>; + reg = <0xfc31b000 0x1000>;

clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1214,36 +819,74 @@ in-ports { #address-cells = <1>; #size-cells = <0>;

+ /* + * Not described input ports: + * 0 - connected trought funnel to Audio, Modem and + * Resource and Power Manager CPU's + * 2...7 - not-connected + */ + port@1 { + reg = <1>; + merger_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + + out-ports { + port { + merger_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator@fc31c000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0xfc31c000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { reg = <0>; - kpss_in0: endpoint { - remote-endpoint = <&etm0_out>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; }; }; port@1 { reg = <1>; - kpss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - port@2 { - reg = <2>; - kpss_in2: endpoint { - remote-endpoint = <&etm2_out>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; }; }; - port@3 { - reg = <3>; - kpss_in3: endpoint { - remote-endpoint = <&etm3_out>; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; }; }; }; + };

- out-ports { + etr@fc322000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0xfc322000 0x1000>; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { port { - kpss_out: endpoint { - remote-endpoint = <&funnel1_in5>; + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; }; }; }; @@ -1321,25 +964,66 @@ etm3_out: endpoint { }; };

- ocmem@fdd00000 { - compatible = "qcom,msm8974-ocmem"; - reg = <0xfdd00000 0x2000>, - <0xfec00000 0x180000>; - reg-names = "ctrl", - "mem"; - clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&mmcc OCMEMCX_OCMEMNOC_CLK>; - clock-names = "core", - "iface"; + /* KPSS funnel, only 4 inputs are used */ + funnel@fc345000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0xfc345000 0x1000>;

- #address-cells = <1>; - #size-cells = <1>; + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk";

- gmu_sram: gmu-sram@0 { - reg = <0x0 0x100000>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + kpss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + kpss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + kpss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + kpss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + kpss_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; }; };

+ gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x4000>; + }; + + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + bimc: interconnect@fc380000 { reg = <0xfc380000 0x6a000>; compatible = "qcom,msm8974-bimc"; @@ -1394,47 +1078,123 @@ cnoc: interconnect@fc480000 { <&rpmcc RPM_SMD_CNOC_A_CLK>; };

- gpu: adreno@fdb00000 { - status = "disabled"; + tsens: thermal-sensor@fc4a9000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a9000 0x1000>, /* TM */ + <0xfc4a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #qcom,sensors = <11>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + };

- compatible = "qcom,adreno-330.1", - "qcom,adreno"; - reg = <0xfdb00000 0x10000>; - reg-names = "kgsl_3d0_reg_memory"; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "kgsl_3d0_irq"; - clock-names = "core", - "iface", - "mem_iface"; - clocks = <&mmcc OXILI_GFX3D_CLK>, - <&mmcc OXILICX_AHB_CLK>, - <&mmcc OXILICX_AXI_CLK>; - sram = <&gmu_sram>; - power-domains = <&mmcc OXILICX_GDSC>; - operating-points-v2 = <&gpu_opp_table>; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + };

- interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, - <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; - interconnect-names = "gfx-mem", - "ocmem"; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + };

- // iommus = <&gpu_iommu 0>; + spmi_bus: spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + };

- gpu_opp_table: opp_table { - compatible = "operating-points-v2"; + remoteproc_mss: remoteproc@fc880000 { + compatible = "qcom,msm8974-mss-pil"; + reg = <0xfc880000 0x100>, <0xfc820000 0x020>; + reg-names = "qdsp6", "rmb";

- opp-320000000 { - opp-hz = /bits/ 64 <320000000>; - }; + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";

- opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - }; + clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 12>; + qcom,smd-edge = <0>; + + label = "modem"; + }; + }; + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tcsr: syscon@fd4a0000 { + compatible = "syscon"; + reg = <0xfd4a0000 0x10000>; + }; + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + };

- opp-27000000 { - opp-hz = /bits/ 64 <27000000>; - }; - }; + mmcc: clock-controller@fd8c0000 { + compatible = "qcom,mmcc-msm8974"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfd8c0000 0x6000>; };

mdss: mdss@fd900000 { @@ -1562,6 +1322,65 @@ dsi0_phy: dsi-phy@fd922a00 { }; };

+ gpu: adreno@fdb00000 { + compatible = "qcom,adreno-330.1", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", "ocmem"; + + // iommus = <&gpu_iommu 0>; + + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + + ocmem@fdd00000 { + compatible = "qcom,msm8974-ocmem"; + reg = <0xfdd00000 0x2000>, + <0xfec00000 0x180000>; + reg-names = "ctrl", "mem"; + clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, + <&mmcc OCMEMCX_OCMEMNOC_CLK>; + clock-names = "core", "iface"; + + #address-cells = <1>; + #size-cells = <1>; + + gmu_sram: gmu-sram@0 { + reg = <0x0 0x100000>; + }; + }; + remoteproc_adsp: remoteproc@fe200000 { compatible = "qcom,msm8974-adsp-pil"; reg = <0xfe200000 0x100>; @@ -1604,76 +1423,194 @@ reboot-mode { }; };

- smd { - compatible = "qcom,smd"; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>;

- rpm { - interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; - qcom,smd-edge = <15>; + #hwlock-cells = <1>; + };

- rpm_requests: rpm-requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>;

- rpmcc: clock-controller { - compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; - #clock-cells = <1>; + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modemtx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + video_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + wlan_alert0: trip-point0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + gpu-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>;

- pm8841-regulators { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 {}; - pm8841_s2: s2 {}; - pm8841_s3: s3 {}; - pm8841_s4: s4 {}; - pm8841_s5: s5 {}; - pm8841_s6: s6 {}; - pm8841_s7: s7 {}; - pm8841_s8: s8 {}; + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; + }; + }; + + gpu-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>;

- pm8941-regulators { - compatible = "qcom,rpm-pm8941-regulators"; - - pm8941_s1: s1 {}; - pm8941_s2: s2 {}; - pm8941_s3: s3 {}; - - pm8941_l1: l1 {}; - pm8941_l2: l2 {}; - pm8941_l3: l3 {}; - pm8941_l4: l4 {}; - pm8941_l5: l5 {}; - pm8941_l6: l6 {}; - pm8941_l7: l7 {}; - pm8941_l8: l8 {}; - pm8941_l9: l9 {}; - pm8941_l10: l10 {}; - pm8941_l11: l11 {}; - pm8941_l12: l12 {}; - pm8941_l13: l13 {}; - pm8941_l14: l14 {}; - pm8941_l15: l15 {}; - pm8941_l16: l16 {}; - pm8941_l17: l17 {}; - pm8941_l18: l18 {}; - pm8941_l19: l19 {}; - pm8941_l20: l20 {}; - pm8941_l21: l21 {}; - pm8941_l22: l22 {}; - pm8941_l23: l23 {}; - pm8941_l24: l24 {}; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs2: lvs2 {}; - pm8941_lvs3: lvs3 {}; + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; }; }; }; };

+ timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; + clock-frequency = <19200000>; + }; + vreg_boost: vreg-boost { compatible = "regulator-fixed";

@@ -1690,6 +1627,7 @@ vreg_boost: vreg-boost { pinctrl-names = "default"; pinctrl-0 = <&boost_bypass_n_pin>; }; + vreg_vph_pwr: vreg-vph-pwr { compatible = "regulator-fixed"; regulator-name = "vph-pwr";