From: Kewei Xu kewei.xu@mediatek.com
[ Upstream commit 3bce7703c7ba648bd9e174dc1413f422b7998833 ]
In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support"), we miss setting OFFSET_EXT_CONF register if i2c->dev_comp->timing_adjust is false, now add it back.
Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support") Signed-off-by: Kewei Xu kewei.xu@mediatek.com Reviewed-by: Qii Wang qii.wang@mediatek.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-mt65xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 1a5f1ccd1d2f..0af2784cbd0d 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -41,6 +41,8 @@ #define I2C_HANDSHAKE_RST 0x0020 #define I2C_FIFO_ADDR_CLR 0x0001 #define I2C_DELAY_LEN 0x0002 +#define I2C_ST_START_CON 0x8001 +#define I2C_FS_START_CON 0x1800 #define I2C_TIME_CLR_VALUE 0x0000 #define I2C_TIME_DEFAULT_VALUE 0x0003 #define I2C_WRRD_TRANAC_VALUE 0x0002 @@ -479,6 +481,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) { u16 control_reg; u16 intr_stat_reg; + u16 ext_conf_val;
mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START); intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT); @@ -517,8 +520,13 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) if (i2c->dev_comp->ltiming_adjust) mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
+ if (i2c->speed_hz <= I2C_MAX_STANDARD_MODE_FREQ) + ext_conf_val = I2C_ST_START_CON; + else + ext_conf_val = I2C_FS_START_CON; + if (i2c->dev_comp->timing_adjust) { - mtk_i2c_writew(i2c, i2c->ac_timing.ext, OFFSET_EXT_CONF); + ext_conf_val = i2c->ac_timing.ext; mtk_i2c_writew(i2c, i2c->ac_timing.inter_clk_div, OFFSET_CLOCK_DIV); mtk_i2c_writew(i2c, I2C_SCL_MIS_COMP_VALUE, @@ -543,6 +551,7 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c) OFFSET_HS_STA_STO_AC_TIMING); } } + mtk_i2c_writew(i2c, ext_conf_val, OFFSET_EXT_CONF);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */ if (i2c->have_pmic)