The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 47c03e6660e96cbba0239125b1d4a9db3c724b1d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025063019-deceiving-cubicle-a65e@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 47c03e6660e96cbba0239125b1d4a9db3c724b1d Mon Sep 17 00:00:00 2001 From: Aradhya Bhatia a-bhatia1@ti.com Date: Sat, 29 Mar 2025 17:09:16 +0530 Subject: [PATCH] drm/bridge: cdns-dsi: Wait for Clk and Data Lanes to be ready
Once the DSI Link and DSI Phy are initialized, the code needs to wait for Clk and Data Lanes to be ready, before continuing configuration. This is in accordance with the DSI Start-up procedure, found in the Technical Reference Manual of Texas Instrument's J721E SoC[0] which houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely, the input signal FIFO gets corrupt. This introduces a color-shift on the display.
Allow the driver to wait for the clk and data lanes to get ready during DSI enable.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM TRM Link: http://www.ti.com/lit/pdf/spruil1
Fixes: e19233955d9e ("drm/bridge: Add Cadence DSI driver") Cc: stable@vger.kernel.org Tested-by: Dominik Haller d.haller@phytec.de Reviewed-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Tested-by: Tomi Valkeinen tomi.valkeinen@ideasonboard.com Signed-off-by: Aradhya Bhatia a-bhatia1@ti.com Signed-off-by: Aradhya Bhatia aradhya.bhatia@linux.dev Link: https://lore.kernel.org/r/20250329113925.68204-6-aradhya.bhatia@linux.dev Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@oss.qualcomm.com
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c index 741d676b8266..93c3d5f1651d 100644 --- a/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c +++ b/drivers/gpu/drm/bridge/cadence/cdns-dsi-core.c @@ -776,7 +776,7 @@ static void cdns_dsi_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_connector *connector; unsigned long tx_byte_period; struct cdns_dsi_cfg dsi_cfg; - u32 tmp, reg_wakeup, div; + u32 tmp, reg_wakeup, div, status; int nlanes;
if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0)) @@ -796,6 +796,19 @@ static void cdns_dsi_bridge_atomic_enable(struct drm_bridge *bridge, cdns_dsi_hs_init(dsi); cdns_dsi_init_link(dsi);
+ /* + * Now that the DSI Link and DSI Phy are initialized, + * wait for the CLK and Data Lanes to be ready. + */ + tmp = CLK_LANE_RDY; + for (int i = 0; i < nlanes; i++) + tmp |= DATA_LANE_RDY(i); + + if (readl_poll_timeout(dsi->regs + MCTL_MAIN_STS, status, + (tmp == (status & tmp)), 100, 500000)) + dev_err(dsi->base.dev, + "Timed Out: DSI-DPhy Clock and Data Lanes not ready.\n"); + writel(HBP_LEN(dsi_cfg.hbp) | HSA_LEN(dsi_cfg.hsa), dsi->regs + VID_HSIZE1); writel(HFP_LEN(dsi_cfg.hfp) | HACT_LEN(dsi_cfg.hact),