From: Eddie James eajames@linux.ibm.com
commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream.
Move the startup procedure into a function, and correct a missing check on the return code for writing the PRS_CFG register.
Cc: stable@vger.kernel.org Signed-off-by: Eddie James eajames@linux.ibm.com Reviewed-by: Joel Stanley joel@jms.id.au Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/pressure/dps310.c | 188 ++++++++++++++++++++++-------------------- 1 file changed, 99 insertions(+), 89 deletions(-)
--- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -159,6 +159,102 @@ static int dps310_get_coefs(struct dps31 return 0; }
+/* + * Some versions of the chip will read temperatures in the ~60C range when + * it's actually ~20C. This is the manufacturer recommended workaround + * to correct the issue. The registers used below are undocumented. + */ +static int dps310_temp_workaround(struct dps310_data *data) +{ + int rc; + int reg; + + rc = regmap_read(data->regmap, 0x32, ®); + if (rc) + return rc; + + /* + * If bit 1 is set then the device is okay, and the workaround does not + * need to be applied + */ + if (reg & BIT(1)) + return 0; + + rc = regmap_write(data->regmap, 0x0e, 0xA5); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0f, 0x96); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x62, 0x02); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0e, 0x00); + if (rc) + return rc; + + return regmap_write(data->regmap, 0x0f, 0x00); +} + +static int dps310_startup(struct dps310_data *data) +{ + int rc; + int ready; + + /* + * Set up pressure sensor in single sample, one measurement per second + * mode + */ + rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); + if (rc) + return rc; + + /* + * Set up external (MEMS) temperature sensor in single sample, one + * measurement per second mode + */ + rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); + if (rc) + return rc; + + /* Temp and pressure shifts are disabled when PRC <= 8 */ + rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, + DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); + if (rc) + return rc; + + /* MEAS_CFG doesn't update correctly unless first written with 0 */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, 0); + if (rc) + return rc; + + /* Turn on temperature and pressure measurement in the background */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | + DPS310_TEMP_EN | DPS310_BACKGROUND); + if (rc) + return rc; + + /* + * Calibration coefficients required for reporting temperature. + * They are available 40ms after the device has started + */ + rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, + ready & DPS310_COEF_RDY, 10000, 40000); + if (rc) + return rc; + + rc = dps310_get_coefs(data); + if (rc) + return rc; + + return dps310_temp_workaround(data); +} + static int dps310_get_pres_precision(struct dps310_data *data) { int rc; @@ -677,52 +773,12 @@ static const struct iio_info dps310_info .write_raw = dps310_write_raw, };
-/* - * Some verions of chip will read temperatures in the ~60C range when - * its actually ~20C. This is the manufacturer recommended workaround - * to correct the issue. The registers used below are undocumented. - */ -static int dps310_temp_workaround(struct dps310_data *data) -{ - int rc; - int reg; - - rc = regmap_read(data->regmap, 0x32, ®); - if (rc < 0) - return rc; - - /* - * If bit 1 is set then the device is okay, and the workaround does not - * need to be applied - */ - if (reg & BIT(1)) - return 0; - - rc = regmap_write(data->regmap, 0x0e, 0xA5); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0f, 0x96); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x62, 0x02); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0e, 0x00); - if (rc < 0) - return rc; - - return regmap_write(data->regmap, 0x0f, 0x00); -} - static int dps310_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct dps310_data *data; struct iio_dev *iio; - int rc, ready; + int rc;
iio = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!iio) @@ -747,54 +803,8 @@ static int dps310_probe(struct i2c_clien if (rc) return rc;
- /* - * Set up pressure sensor in single sample, one measurement per second - * mode - */ - rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); - - /* - * Set up external (MEMS) temperature sensor in single sample, one - * measurement per second mode - */ - rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); - if (rc < 0) - return rc; - - /* Temp and pressure shifts are disabled when PRC <= 8 */ - rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, - DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); - if (rc < 0) - return rc; - - /* MEAS_CFG doesn't update correctly unless first written with 0 */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, 0); - if (rc < 0) - return rc; - - /* Turn on temperature and pressure measurement in the background */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | - DPS310_TEMP_EN | DPS310_BACKGROUND); - if (rc < 0) - return rc; - - /* - * Calibration coefficients required for reporting temperature. - * They are available 40ms after the device has started - */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_COEF_RDY, 10000, 40000); - if (rc < 0) - return rc; - - rc = dps310_get_coefs(data); - if (rc < 0) - return rc; - - rc = dps310_temp_workaround(data); - if (rc < 0) + rc = dps310_startup(data); + if (rc) return rc;
rc = devm_iio_device_register(&client->dev, iio);