From: John Keeping john@metanate.com
[ Upstream commit 92ef98a4caacad6d4a1490dda45d81ae5ccf5bc9 ]
DWC2 may be paired with a full-speed PHY which is not capable of high-speed operation. Report this correctly to the gadget core by setting max_speed from the core parameters.
Prior to commit 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") this didn't cause the hardware to be configured incorrectly, although the speed may have been reported incorrectly. But after that commit params.speed is updated based on a value passed in by the gadget core which may set it to a faster speed than is supported by the hardware. Initialising the max_speed parameter ensures the speed passed to dwc2_gadget_set_speed() will be one supported by the hardware.
Fixes: 5324bad66f09f ("usb: dwc2: gadget: implement udc_set_speed()") Acked-by: Minas Harutyunyan Minas.Harutyunyan@synopsys.com Signed-off-by: John Keeping john@metanate.com Link: https://lore.kernel.org/r/20220106115731.1473909-1-john@metanate.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/gadget.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2190225bf3da2..ea0d2d6139a68 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -4974,7 +4974,18 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg) hsotg->params.g_np_tx_fifo_size); dev_dbg(dev, "RXFIFO size: %d\n", hsotg->params.g_rx_fifo_size);
- hsotg->gadget.max_speed = USB_SPEED_HIGH; + switch (hsotg->params.speed) { + case DWC2_SPEED_PARAM_LOW: + hsotg->gadget.max_speed = USB_SPEED_LOW; + break; + case DWC2_SPEED_PARAM_FULL: + hsotg->gadget.max_speed = USB_SPEED_FULL; + break; + default: + hsotg->gadget.max_speed = USB_SPEED_HIGH; + break; + } + hsotg->gadget.ops = &dwc2_hsotg_gadget_ops; hsotg->gadget.name = dev_name(dev); hsotg->remote_wakeup_allowed = 0;