The current implementation of CXL memory hotplug notifier gets called before the HMAT memory hotplug notifier. The CXL driver calculates the access coordinates (bandwidth and latency values) for the CXL end to end path (i.e. CPU to endpoint). When the CXL region is onlined, the CXL memory hotplug notifier writes the access coordinates to the HMAT target structs. Then the HMAT memory hotplug notifier is called and it creates the access coordinates for the node sysfs attributes.
During testing on an Intel platform, it was found that although the newly calculated coordinates were pushed to sysfs, the sysfs attributes for the access coordinates showed up with the wrong initiator. The system has 4 nodes (0, 1, 2, 3) where node 0 and 1 are CPU nodes and node 2 and 3 are CXL nodes. The expectation is that node 2 would show up as a target to node 0: /sys/devices/system/node/node2/access0/initiators/node0
However it was observed that node 2 showed up as a target under node 1: /sys/devices/system/node/node2/access0/initiators/node1
The original intent of the 'ext_updated' flag in HMAT handling code was to stop HMAT memory hotplug callback from clobbering the access coordinates after CXL has injected its calculated coordinates and replaced the generic target access coordinates provided by the HMAT table in the HMAT target structs. However the flag is hacky at best and blocks the updates from other CXL regions that are onlined in the same node later on. Remove the 'ext_updated' flag usage and just update the access coordinates for the nodes directly without touching HMAT target data.
The hotplug memory callback ordering is changed. Instead of changing CXL, move HMAT back so there's room for the levels rather than have CXL share the same level as SLAB_CALLBACK_PRI. The change will resulting in the CXL callback to be executed after the HMAT callback.
With the change, the CXL hotplug memory notifier runs after the HMAT callback. The HMAT callback will create the node sysfs attributes for access coordinates. The CXL callback will write the access coordinates to the now created node sysfs attributes directly and will not pollute the HMAT target values.
A nodemask is introduced to keep track if a node has been updated and prevents further updates.
Fixes: 067353a46d8c ("cxl/region: Add memory hotplug notifier for cxl region") Cc: stable@vger.kernel.org Tested-by: Marc Herbert marc.herbert@linux.intel.com Reviewed-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Dave Jiang dave.jiang@intel.com --- v3: - Use nodemask instead of xarray to keep track of node updates (Jonathan) --- drivers/acpi/numa/hmat.c | 6 ------ drivers/cxl/core/cdat.c | 5 ----- drivers/cxl/core/core.h | 1 - drivers/cxl/core/region.c | 20 ++++++++++++-------- include/linux/memory.h | 2 +- 5 files changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c index 4958301f5417..5d32490dc4ab 100644 --- a/drivers/acpi/numa/hmat.c +++ b/drivers/acpi/numa/hmat.c @@ -74,7 +74,6 @@ struct memory_target { struct node_cache_attrs cache_attrs; u8 gen_port_device_handle[ACPI_SRAT_DEVICE_HANDLE_SIZE]; bool registered; - bool ext_updated; /* externally updated */ };
struct memory_initiator { @@ -391,7 +390,6 @@ int hmat_update_target_coordinates(int nid, struct access_coordinate *coord, coord->read_bandwidth, access); hmat_update_target_access(target, ACPI_HMAT_WRITE_BANDWIDTH, coord->write_bandwidth, access); - target->ext_updated = true;
return 0; } @@ -773,10 +771,6 @@ static void hmat_update_target_attrs(struct memory_target *target, u32 best = 0; int i;
- /* Don't update if an external agent has changed the data. */ - if (target->ext_updated) - return; - /* Don't update for generic port if there's no device handle */ if ((access == NODE_ACCESS_CLASS_GENPORT_SINK_LOCAL || access == NODE_ACCESS_CLASS_GENPORT_SINK_CPU) && diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c index c0af645425f4..c891fd618cfd 100644 --- a/drivers/cxl/core/cdat.c +++ b/drivers/cxl/core/cdat.c @@ -1081,8 +1081,3 @@ int cxl_update_hmat_access_coordinates(int nid, struct cxl_region *cxlr, { return hmat_update_target_coordinates(nid, &cxlr->coord[access], access); } - -bool cxl_need_node_perf_attrs_update(int nid) -{ - return !acpi_node_backed_by_real_pxm(nid); -} diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h index 2669f251d677..a253d308f3c9 100644 --- a/drivers/cxl/core/core.h +++ b/drivers/cxl/core/core.h @@ -139,7 +139,6 @@ long cxl_pci_get_latency(struct pci_dev *pdev); int cxl_pci_get_bandwidth(struct pci_dev *pdev, struct access_coordinate *c); int cxl_update_hmat_access_coordinates(int nid, struct cxl_region *cxlr, enum access_coordinate_class access); -bool cxl_need_node_perf_attrs_update(int nid); int cxl_port_get_switch_dport_bandwidth(struct cxl_port *port, struct access_coordinate *c);
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c index 71cc42d05248..0ed95cbc5d5b 100644 --- a/drivers/cxl/core/region.c +++ b/drivers/cxl/core/region.c @@ -30,6 +30,12 @@ * 3. Decoder targets */
+/* + * nodemask that sets per node when the access_coordinates for the node has + * been updated by the CXL memory hotplug notifier. + */ +static nodemask_t nodemask_region_seen = NODE_MASK_NONE; + static struct cxl_region *to_cxl_region(struct device *dev);
#define __ACCESS_ATTR_RO(_level, _name) { \ @@ -2442,14 +2448,8 @@ static bool cxl_region_update_coordinates(struct cxl_region *cxlr, int nid)
for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { if (cxlr->coord[i].read_bandwidth) { - rc = 0; - if (cxl_need_node_perf_attrs_update(nid)) - node_set_perf_attrs(nid, &cxlr->coord[i], i); - else - rc = cxl_update_hmat_access_coordinates(nid, cxlr, i); - - if (rc == 0) - cset++; + node_update_perf_attrs(nid, &cxlr->coord[i], i); + cset++; } }
@@ -2487,6 +2487,10 @@ static int cxl_region_perf_attrs_callback(struct notifier_block *nb, if (nid != region_nid) return NOTIFY_DONE;
+ /* No action needed if node bit already set */ + if (node_test_and_set(nid, nodemask_region_seen)) + return NOTIFY_DONE; + if (!cxl_region_update_coordinates(cxlr, nid)) return NOTIFY_DONE;
diff --git a/include/linux/memory.h b/include/linux/memory.h index 1305102688d0..0b755d1ef1ec 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -120,8 +120,8 @@ struct mem_section; */ #define DEFAULT_CALLBACK_PRI 0 #define SLAB_CALLBACK_PRI 1 -#define HMAT_CALLBACK_PRI 2 #define CXL_CALLBACK_PRI 5 +#define HMAT_CALLBACK_PRI 6 #define MM_COMPUTE_BATCH_PRI 10 #define CPUSET_CALLBACK_PRI 10 #define MEMTIER_HOTPLUG_PRI 100