The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 47bddabbf69da50999ec68be92b58356c687e1d6 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025062000-manhunt-treachery-4c42@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 47bddabbf69da50999ec68be92b58356c687e1d6 Mon Sep 17 00:00:00 2001 From: Md Sadre Alam quic_mdalam@quicinc.com Date: Thu, 10 Apr 2025 15:30:18 +0530 Subject: [PATCH] mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
For QPIC V2 onwards there is a separate register to read last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
qcom_param_page_type_exec() is used to read only one code word If it configures the number of code words to 1 in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks its reading the last code word, since we are having separate register to read the last code word, we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register to fetch data from QPIC buffer to system memory.
Without this change page read was failing with timeout error
/ # hexdump -C /dev/mtd1 [ 129.206113] qcom-nandc 1cc8000.nand-controller: failure to read page/oob hexdump: /dev/mtd1: Connection timed out
This issue only seen on SDX targets since SDX target used QPICv2. But same working on IPQ targets since IPQ used QPICv1.
Cc: stable@vger.kernel.org Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()") Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Tested-by: Lakshmi Sowjanya D quic_laksd@quicinc.com Signed-off-by: Md Sadre Alam quic_mdalam@quicinc.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index ef2dd158ca34..a73bb154353f 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -1863,7 +1863,12 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_ const struct nand_op_instr *instr = NULL; unsigned int op_id = 0; unsigned int len = 0; - int ret; + int ret, reg_base; + + reg_base = NAND_READ_LOCATION_0; + + if (nandc->props->qpic_version2) + reg_base = NAND_READ_LOCATION_LAST_CW_0;
ret = qcom_parse_instructions(chip, subop, &q_op); if (ret) @@ -1915,7 +1920,10 @@ static int qcom_param_page_type_exec(struct nand_chip *chip, const struct nand_ op_id = q_op.data_instr_idx; len = nand_subop_get_data_len(subop, op_id);
- nandc_set_read_loc(chip, 0, 0, 0, len, 1); + if (nandc->props->qpic_version2) + nandc_set_read_loc_last(chip, reg_base, 0, len, 1); + else + nandc_set_read_loc_first(chip, reg_base, 0, len, 1);
if (!nandc->props->qpic_version2) { qcom_write_reg_dma(nandc, &nandc->regs->vld, NAND_DEV_CMD_VLD, 1, 0);