From: Hans J. Schultz netdev@kapio-technology.com
commit 4bf24ad09bc0b05e97fb48b962b2c9246fc76727 upstream.
When an ATU violation occurs, the switch uses the ATU FID register to report the FID of the MAC address that incurred the violation. It would be good for the driver to know the FID value for purposes such as logging and CPU-based authentication.
Up until now, the driver has been calling the mv88e6xxx_g1_atu_op() function to read ATU violations, but that doesn't do exactly what we want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0. (side note, the documentation for the ATU Get/Clear Violation command says that writes to the ATU FID register have no effect before the operation starts, it's only that we disregard the value that this register provides once the operation completes)
So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need to write it.
The remainder of mv88e6xxx_g1_atu_op() except for mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a GET_CLR_VIOLATION command to the ATU. In principle we could have still kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID register are pointless, but in the interest of doing less CPU work per interrupt, write a new function called mv88e6xxx_g1_read_atu_violation() and call it.
The FID will be the port default FID as set by mv88e6xxx_port_set_fid() if the VID from the packet cannot be found in the VTU. Otherwise it is the FID derived from the VTU entry associated with that VID.
Signed-off-by: Hans J. Schultz netdev@kapio-technology.com Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Cc: Fabio Estevam festevam@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mv88e6xxx/global1_atu.c | 72 +++++++++++++++++++++++++++----- 1 file changed, 61 insertions(+), 11 deletions(-)
--- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -114,6 +114,19 @@ static int mv88e6xxx_g1_atu_op_wait(stru return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_ATU_OP, bit, 0); }
+static int mv88e6xxx_g1_read_atu_violation(struct mv88e6xxx_chip *chip) +{ + int err; + + err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_ATU_OP, + MV88E6XXX_G1_ATU_OP_BUSY | + MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + if (err) + return err; + + return mv88e6xxx_g1_atu_op_wait(chip); +} + static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op) { u16 val; @@ -159,6 +172,41 @@ int mv88e6xxx_g1_atu_get_next(struct mv8 return mv88e6xxx_g1_atu_op(chip, fid, MV88E6XXX_G1_ATU_OP_GET_NEXT_DB); }
+static int mv88e6xxx_g1_atu_fid_read(struct mv88e6xxx_chip *chip, u16 *fid) +{ + u16 val = 0, upper = 0, op = 0; + int err = -EOPNOTSUPP; + + if (mv88e6xxx_num_databases(chip) > 256) { + err = mv88e6xxx_g1_read(chip, MV88E6352_G1_ATU_FID, &val); + val &= 0xfff; + if (err) + return err; + } else { + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_OP, &op); + if (err) + return err; + if (mv88e6xxx_num_databases(chip) > 64) { + /* ATU DBNum[7:4] are located in ATU Control 15:12 */ + err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_ATU_CTL, + &upper); + if (err) + return err; + + upper = (upper >> 8) & 0x00f0; + } else if (mv88e6xxx_num_databases(chip) > 16) { + /* ATU DBNum[5:4] are located in ATU Operation 9:8 */ + upper = (op >> 4) & 0x30; + } + + /* ATU DBNum[3:0] are located in ATU Operation 3:0 */ + val = (op & 0xf) | upper; + } + *fid = val; + + return err; +} + /* Offset 0x0C: ATU Data Register */
static int mv88e6xxx_g1_atu_data_read(struct mv88e6xxx_chip *chip, @@ -353,14 +401,12 @@ static irqreturn_t mv88e6xxx_g1_atu_prob { struct mv88e6xxx_chip *chip = dev_id; struct mv88e6xxx_atu_entry entry; - int spid; - int err; - u16 val; + int err, spid; + u16 val, fid;
mv88e6xxx_reg_lock(chip);
- err = mv88e6xxx_g1_atu_op(chip, 0, - MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + err = mv88e6xxx_g1_read_atu_violation(chip); if (err) goto out;
@@ -368,6 +414,10 @@ static irqreturn_t mv88e6xxx_g1_atu_prob if (err) goto out;
+ err = mv88e6xxx_g1_atu_fid_read(chip, &fid); + if (err) + goto out; + err = mv88e6xxx_g1_atu_data_read(chip, &entry); if (err) goto out; @@ -386,22 +436,22 @@ static irqreturn_t mv88e6xxx_g1_atu_prob
if (val & MV88E6XXX_G1_ATU_OP_MEMBER_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU member violation for %pM portvec %x spid %d\n", - entry.mac, entry.portvec, spid); + "ATU member violation for %pM fid %u portvec %x spid %d\n", + entry.mac, fid, entry.portvec, spid); chip->ports[spid].atu_member_violation++; }
if (val & MV88E6XXX_G1_ATU_OP_MISS_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU miss violation for %pM portvec %x spid %d\n", - entry.mac, entry.portvec, spid); + "ATU miss violation for %pM fid %u portvec %x spid %d\n", + entry.mac, fid, entry.portvec, spid); chip->ports[spid].atu_miss_violation++; }
if (val & MV88E6XXX_G1_ATU_OP_FULL_VIOLATION) { dev_err_ratelimited(chip->dev, - "ATU full violation for %pM portvec %x spid %d\n", - entry.mac, entry.portvec, spid); + "ATU full violation for %pM fid %u portvec %x spid %d\n", + entry.mac, fid, entry.portvec, spid); chip->ports[spid].atu_full_violation++; } mv88e6xxx_reg_unlock(chip);