From: Vignesh Raghavendra vigneshr@ti.com
commit bd8a6e31b87b39a03ab11820776363640440dbe0 upstream.
mt25q family is different from n25q family of devices, even though manf ID and device IDs are same. mt25q flash has bit 6 set in 5th byte of READ ID response which can be used to distinguish it from n25q variant. mt25q flashes support stateless 4 Byte addressing opcodes where as n25q flashes don't. Therefore, have two separate entries for mt25qu512a and n25q512a.
Fixes: 9607af6f857f ("mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)"") Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Tudor Ambarus tudor.ambarus@microchip.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mtd/spi-nor/spi-nor.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -2461,15 +2461,16 @@ static const struct flash_info spi_nor_i { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, + { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024, + SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | + SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | + SPI_NOR_QUAD_READ) }, { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) }, - { "mt25qu512a (n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024, - SECT_4K | USE_FSR | SPI_NOR_DUAL_READ | - SPI_NOR_QUAD_READ | - SPI_NOR_4B_OPCODES) }, { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
/* Micron */