From: Vladimir Zapolskiy vz@mleia.com
[ Upstream commit dc141b99fc36cf910a1d8d5ee30f43f2442fd1bd ]
The fixed voltage regulator on Phytec phyCORE-LPC3250 board, which supplies SD/MMC card's power, has a constant output voltage level of either 3.15V or 3.3V, the actual value depends on JP4 position, the power rail is referenced as VCC_SDIO in the board hardware manual.
Fixes: d06670e96267 ("arm: dts: phy3250: add SD fixed regulator") Signed-off-by: Vladimir Zapolskiy vz@mleia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/lpc3250-phy3250.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/lpc3250-phy3250.dts b/arch/arm/boot/dts/lpc3250-phy3250.dts index 1e1c2f517a82..ffcf78631b22 100644 --- a/arch/arm/boot/dts/lpc3250-phy3250.dts +++ b/arch/arm/boot/dts/lpc3250-phy3250.dts @@ -49,8 +49,8 @@ sd_reg: regulator@2 { compatible = "regulator-fixed"; regulator-name = "sd_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; gpio = <&gpio 5 5 0>; enable-active-high; };