From: Chunfeng Yun chunfeng.yun@mediatek.com
[ Upstream commit ccda8c224c0701caac007311d06a2de9543a7590 ]
This is used to provide more information about which case causes bandwidth schedule failure.
Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.161517062... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci-mtk-sch.c | 44 ++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 9a9685f74940..a6ec75bf2def 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -25,6 +25,13 @@ */ #define TT_MICROFRAMES_MAX 9
+/* schedule error type */ +#define ESCH_SS_Y6 1001 +#define ESCH_SS_OVERLAP 1002 +#define ESCH_CS_OVERFLOW 1003 +#define ESCH_BW_OVERFLOW 1004 +#define ESCH_FIXME 1005 + /* mtk scheduler bitmasks */ #define EP_BPKTS(p) ((p) & 0x7f) #define EP_BCSCOUNT(p) (((p) & 0x7) << 8) @@ -32,6 +39,24 @@ #define EP_BOFFSET(p) ((p) & 0x3fff) #define EP_BREPEAT(p) (((p) & 0x7fff) << 16)
+static char *sch_error_string(int err_num) +{ + switch (err_num) { + case ESCH_SS_Y6: + return "Can't schedule Start-Split in Y6"; + case ESCH_SS_OVERLAP: + return "Can't find a suitable Start-Split location"; + case ESCH_CS_OVERFLOW: + return "The last Complete-Split is greater than 7"; + case ESCH_BW_OVERFLOW: + return "Bandwidth exceeds the maximum limit"; + case ESCH_FIXME: + return "FIXME, to be resolved"; + default: + return "Unknown"; + } +} + static int is_fs_or_ls(enum usb_device_speed speed) { return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; @@ -395,7 +420,7 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) for (j = 0; j < sch_ep->cs_count; j++) { tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; if (tmp > FS_PAYLOAD_MAX) - return -ERANGE; + return -ESCH_BW_OVERFLOW; } }
@@ -421,11 +446,11 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (!(start_ss == 7 || last_ss < 6)) - return -ERANGE; + return -ESCH_SS_Y6;
for (i = 0; i < sch_ep->cs_count; i++) if (test_bit(offset + i, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP;
} else { u32 cs_count = DIV_ROUND_UP(sch_ep->maxpkt, FS_PAYLOAD_MAX); @@ -435,14 +460,14 @@ static int check_sch_tt(struct usb_device *udev, * must never schedule Start-Split in Y6 */ if (start_ss == 6) - return -ERANGE; + return -ESCH_SS_Y6;
/* one uframe for ss + one uframe for idle */ start_cs = (start_ss + 2) % 8; last_cs = start_cs + cs_count - 1;
if (last_cs > 7) - return -ERANGE; + return -ESCH_CS_OVERFLOW;
if (sch_ep->ep_type == ISOC_IN_EP) extra_cs_count = (last_cs == 7) ? 1 : 2; @@ -454,7 +479,7 @@ static int check_sch_tt(struct usb_device *udev, cs_count = 7; /* HW limit */
if (test_bit(offset, tt->ss_bit_map)) - return -ERANGE; + return -ESCH_SS_OVERLAP;
sch_ep->cs_count = cs_count; /* one for ss, the other for idle */ @@ -547,7 +572,7 @@ static int check_sch_bw(struct usb_device *udev, u32 esit_boundary; u32 min_num_budget; u32 min_cs_count; - int ret; + int ret = 0;
/* * Search through all possible schedule microframes. @@ -588,7 +613,7 @@ static int check_sch_bw(struct usb_device *udev,
/* check bandwidth */ if (min_bw > bw_boundary) - return -ERANGE; + return ret ? ret : -ESCH_BW_OVERFLOW;
sch_ep->offset = min_index; sch_ep->cs_count = min_cs_count; @@ -765,7 +790,8 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
ret = check_sch_bw(udev, sch_bw, sch_ep); if (ret) { - xhci_err(xhci, "Not enough bandwidth!\n"); + xhci_err(xhci, "Not enough bandwidth! (%s)\n", + sch_error_string(-ret)); return -ENOSPC; } }