6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandru Ardelean aardelean@baylibre.com
commit bc73b4186736341ab5cd2c199da82db6e1134e13 upstream.
A bug was found in the find_closest() (find_closest_descending() is also affected after some testing), where for certain values with small progressions, the rounding (done by averaging 2 values) causes an incorrect index to be returned. The rounding issues occur for progressions of 1, 2 and 3. It goes away when the progression/interval between two values is 4 or larger.
It's particularly bad for progressions of 1. For example if there's an array of 'a = { 1, 2, 3 }', using 'find_closest(2, a ...)' would return 0 (the index of '1'), rather than returning 1 (the index of '2'). This means that for exact values (with a progression of 1), find_closest() will misbehave and return the index of the value smaller than the one we're searching for.
For progressions of 2 and 3, the exact values are obtained correctly; but values aren't approximated correctly (as one would expect). Starting with progressions of 4, all seems to be good (one gets what one would expect).
While one could argue that 'find_closest()' should not be used for arrays with progressions of 1 (i.e. '{1, 2, 3, ...}', the macro should still behave correctly.
The bug was found while testing the 'drivers/iio/adc/ad7606.c', specifically the oversampling feature. For reference, the oversampling values are listed as: static const unsigned int ad7606_oversampling_avail[7] = { 1, 2, 4, 8, 16, 32, 64, };
When doing: 1. $ echo 1 > /sys/bus/iio/devices/iio:device0/oversampling_ratio $ cat /sys/bus/iio/devices/iio:device0/oversampling_ratio 1 # this is fine 2. $ echo 2 > /sys/bus/iio/devices/iio:device0/oversampling_ratio $ cat /sys/bus/iio/devices/iio:device0/oversampling_ratio 1 # this is wrong; 2 should be returned here 3. $ echo 3 > /sys/bus/iio/devices/iio:device0/oversampling_ratio $ cat /sys/bus/iio/devices/iio:device0/oversampling_ratio 2 # this is fine 4. $ echo 4 > /sys/bus/iio/devices/iio:device0/oversampling_ratio $ cat /sys/bus/iio/devices/iio:device0/oversampling_ratio 4 # this is fine And from here-on, the values are as correct (one gets what one would expect.)
While writing a kunit test for this bug, a peculiar issue was found for the array in the 'drivers/hwmon/ina2xx.c' & 'drivers/iio/adc/ina2xx-adc.c' drivers. While running the kunit test (for 'ina226_avg_tab' from these drivers): * idx = find_closest([-1 to 2], ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab)); This returns idx == 0, so value. * idx = find_closest(3, ina226_avg_tab, ARRAY_SIZE(ina226_avg_tab)); This returns idx == 0, value 1; and now one could argue whether 3 is closer to 4 or to 1. This quirk only appears for value '3' in this array, but it seems to be a another rounding issue. * And from 4 onwards the 'find_closest'() works fine (one gets what one would expect).
This change reworks the find_closest() macros to also check the difference between the left and right elements when 'x'. If the distance to the right is smaller (than the distance to the left), the index is incremented by 1. This also makes redundant the need for using the DIV_ROUND_CLOSEST() macro.
In order to accommodate for any mix of negative + positive values, the internal variables '__fc_x', '__fc_mid_x', '__fc_left' & '__fc_right' are forced to 'long' type. This also addresses any potential bugs/issues with 'x' being of an unsigned type. In those situations any comparison between signed & unsigned would be promoted to a comparison between 2 unsigned numbers; this is especially annoying when '__fc_left' & '__fc_right' underflow.
The find_closest_descending() macro was also reworked and duplicated from the find_closest(), and it is being iterated in reverse. The main reason for this is to get the same indices as 'find_closest()' (but in reverse). The comparison for '__fc_right < __fc_left' favors going the array in ascending order. For example for array '{ 1024, 512, 256, 128, 64, 16, 4, 1 }' and x = 3, we get: __fc_mid_x = 2 __fc_left = -1 __fc_right = -2 Then '__fc_right < __fc_left' evaluates to true and '__fc_i++' becomes 7 which is not quite incorrect, but 3 is closer to 4 than to 1.
This change has been validated with the kunit from the next patch.
Link: https://lkml.kernel.org/r/20241105145406.554365-1-aardelean@baylibre.com Fixes: 95d119528b0b ("util_macros.h: add find_closest() macro") Signed-off-by: Alexandru Ardelean aardelean@baylibre.com Cc: Bartosz Golaszewski bartosz.golaszewski@linaro.org Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/util_macros.h | 56 +++++++++++++++++++++++++++++++------------- 1 file changed, 40 insertions(+), 16 deletions(-)
--- a/include/linux/util_macros.h +++ b/include/linux/util_macros.h @@ -4,19 +4,6 @@
#include <linux/math.h>
-#define __find_closest(x, a, as, op) \ -({ \ - typeof(as) __fc_i, __fc_as = (as) - 1; \ - typeof(x) __fc_x = (x); \ - typeof(*a) const *__fc_a = (a); \ - for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ - if (__fc_x op DIV_ROUND_CLOSEST(__fc_a[__fc_i] + \ - __fc_a[__fc_i + 1], 2)) \ - break; \ - } \ - (__fc_i); \ -}) - /** * find_closest - locate the closest element in a sorted array * @x: The reference value. @@ -25,8 +12,27 @@ * @as: Size of 'a'. * * Returns the index of the element closest to 'x'. + * Note: If using an array of negative numbers (or mixed positive numbers), + * then be sure that 'x' is of a signed-type to get good results. */ -#define find_closest(x, a, as) __find_closest(x, a, as, <=) +#define find_closest(x, a, as) \ +({ \ + typeof(as) __fc_i, __fc_as = (as) - 1; \ + long __fc_mid_x, __fc_x = (x); \ + long __fc_left, __fc_right; \ + typeof(*a) const *__fc_a = (a); \ + for (__fc_i = 0; __fc_i < __fc_as; __fc_i++) { \ + __fc_mid_x = (__fc_a[__fc_i] + __fc_a[__fc_i + 1]) / 2; \ + if (__fc_x <= __fc_mid_x) { \ + __fc_left = __fc_x - __fc_a[__fc_i]; \ + __fc_right = __fc_a[__fc_i + 1] - __fc_x; \ + if (__fc_right < __fc_left) \ + __fc_i++; \ + break; \ + } \ + } \ + (__fc_i); \ +})
/** * find_closest_descending - locate the closest element in a sorted array @@ -36,9 +42,27 @@ * @as: Size of 'a'. * * Similar to find_closest() but 'a' is expected to be sorted in descending - * order. + * order. The iteration is done in reverse order, so that the comparison + * of '__fc_right' & '__fc_left' also works for unsigned numbers. */ -#define find_closest_descending(x, a, as) __find_closest(x, a, as, >=) +#define find_closest_descending(x, a, as) \ +({ \ + typeof(as) __fc_i, __fc_as = (as) - 1; \ + long __fc_mid_x, __fc_x = (x); \ + long __fc_left, __fc_right; \ + typeof(*a) const *__fc_a = (a); \ + for (__fc_i = __fc_as; __fc_i >= 1; __fc_i--) { \ + __fc_mid_x = (__fc_a[__fc_i] + __fc_a[__fc_i - 1]) / 2; \ + if (__fc_x <= __fc_mid_x) { \ + __fc_left = __fc_x - __fc_a[__fc_i]; \ + __fc_right = __fc_a[__fc_i - 1] - __fc_x; \ + if (__fc_right < __fc_left) \ + __fc_i--; \ + break; \ + } \ + } \ + (__fc_i); \ +})
/** * is_insidevar - check if the @ptr points inside the @var memory range.