From: Ricardo Ribalda ribalda@chromium.org
[ Upstream commit 136effa754b57632f99574fc4a3433e0cfc031d9 ]
Logitech B910 and C910 firmware are unable to recover from a USB autosuspend. When it resumes, the device is in a state where it only produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1 [350438.435219] uvcvideo: uvc_v4l2_open [350438.529794] uvcvideo: Resuming interface 2 [350438.529801] uvcvideo: Resuming interface 3 [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080. [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps). [350438.551496] uvcvideo: uvc_v4l2_mmap [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth. [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth). [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each. [350439.316468] uvcvideo: Marking buffer as bad (error bit set). [350439.316475] uvcvideo: Frame complete (EOF found). [350439.316477] uvcvideo: EOF in empty payload. [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249 [350439.384510] uvcvideo: Marking buffer as bad (error bit set). [350439.384516] uvcvideo: Frame complete (EOF found). [350439.384518] uvcvideo: EOF in empty payload. [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316 [350439.448472] uvcvideo: Marking buffer as bad (error bit set). [350439.448478] uvcvideo: Frame complete (EOF found). [350439.448480] uvcvideo: EOF in empty payload. [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382 ...(loop)...
The devices can leave this invalid state if the alternate setting of the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended properly.
lsusb -v: Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x0821 HD Webcam C910 bcdDevice 0.10 iManufacturer 0 iProduct 0 iSerial 1 390022B0 bNumConfigurations 1
Signed-off-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++ drivers/media/usb/uvc/uvc_video.c | 11 +++++++++++ drivers/media/usb/uvc/uvcvideo.h | 1 + 3 files changed, 30 insertions(+)
diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index f6c48f22c6724..0caa57a6782aa 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -2462,6 +2462,24 @@ static const struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = (kernel_ulong_t)&uvc_quirk_probe_minmax }, + /* Logitech, Webcam C910 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x0821, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)}, + /* Logitech, Webcam B910 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x0823, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)}, /* Logitech Quickcam Fusion */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index fe58723fc5ac7..698aecf1aad48 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1903,6 +1903,17 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream, uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u " "(%u B/frame bandwidth).\n", altsetting, best_psize);
+ /* + * Some devices, namely the Logitech C910 and B910, are unable + * to recover from a USB autosuspend, unless the alternate + * setting of the streaming interface is toggled. + */ + if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) { + usb_set_interface(stream->dev->udev, intfnum, + altsetting); + usb_set_interface(stream->dev->udev, intfnum, 0); + } + ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); if (ret < 0) return ret; diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index 5f137400bebd6..6afbfc71bad4b 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -199,6 +199,7 @@ #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400 #define UVC_QUIRK_FORCE_Y8 0x00000800 #define UVC_QUIRK_FORCE_BPP 0x00001000 +#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
/* Format flags */ #define UVC_FMT_FLAG_COMPRESSED 0x00000001