From: Wright Feng wright.feng@cypress.com
[ Upstream commit e1a08730eeb0bad4d82c3bc40e74854872de618d ]
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional throughput test. Enable watermark to 256 to guarantee the operation stability.
Reviewed-by: Arend van Spriel arend.vanspriel@broadcom.com Signed-off-by: Wright Feng wright.feng@cypress.com Signed-off-by: Chi-Hsien Lin chi-hsien.lin@cypress.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../broadcom/brcm80211/brcmfmac/sdio.c | 26 +++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 53e4962ceb8ae..e487dd78cc024 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -49,6 +49,10 @@ #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500)
+/* watermark expressed in number of words */ +#define DEFAULT_F2_WATERMARK 0x8 +#define CY_4373_F2_WATERMARK 0x40 + #ifdef DEBUG
#define BRCMF_TRAP_INFO_SIZE 80 @@ -138,6 +142,8 @@ struct rte_console { /* 1: isolate internal sdio signals, put external pads in tri-state; requires * sdio bus power cycle to clear (rev 9) */ #define SBSDIO_DEVCTL_PADS_ISO 0x08 +/* 1: enable F2 Watermark */ +#define SBSDIO_DEVCTL_F2WM_ENAB 0x10 /* Force SD->SB reset mapping (rev 11) */ #define SBSDIO_DEVCTL_SB_RST_CTL 0x30 /* Determined by CoreControl bit */ @@ -4060,6 +4066,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, void *nvram; u32 nvram_len; u8 saveclk; + u8 devctl;
brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
@@ -4115,8 +4122,23 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err, brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask), bus->hostintmask, NULL);
- - brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err); + switch (sdiod->func1->device) { + case SDIO_DEVICE_ID_CYPRESS_4373: + brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", + CY_4373_F2_WATERMARK); + brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, + CY_4373_F2_WATERMARK, &err); + devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, + &err); + devctl |= SBSDIO_DEVCTL_F2WM_ENAB; + brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, + &err); + break; + default: + brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, + DEFAULT_F2_WATERMARK, &err); + break; + } } else { /* Disable F2 again */ sdio_disable_func(sdiod->func2);