The device bus LAN ID was obtained from PCI_FUNC(), but when a PF port is passthrough to a virtual machine, the function number may not match the actual port index on the device. This could cause the driver to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8fb ("net: txgbe: Store PCI info") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu jiawenwu@trustnetic.com --- drivers/net/ethernet/wangxun/libwx/wx_hw.c | 3 ++- drivers/net/ethernet/wangxun/libwx/wx_type.h | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c index 814164459707..58b8300e3d2c 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c +++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c @@ -2480,7 +2480,8 @@ int wx_sw_init(struct wx *wx) wx->oem_svid = pdev->subsystem_vendor; wx->oem_ssid = pdev->subsystem_device; wx->bus.device = PCI_SLOT(pdev->devfn); - wx->bus.func = PCI_FUNC(pdev->devfn); + wx->bus.func = FIELD_GET(WX_CFG_PORT_ST_LANID, + rd32(wx, WX_CFG_PORT_ST));
if (wx->oem_svid == PCI_VENDOR_ID_WANGXUN || pdev->is_virtfn) { diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h index d0cbcded1dd4..b1a6ef5709a9 100644 --- a/drivers/net/ethernet/wangxun/libwx/wx_type.h +++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h @@ -102,6 +102,8 @@ #define WX_CFG_PORT_CTL_DRV_LOAD BIT(3) #define WX_CFG_PORT_CTL_QINQ BIT(2) #define WX_CFG_PORT_CTL_D_VLAN BIT(0) /* double vlan*/ +#define WX_CFG_PORT_ST 0x14404 +#define WX_CFG_PORT_ST_LANID GENMASK(9, 8) #define WX_CFG_TAG_TPID(_i) (0x14430 + ((_i) * 4)) #define WX_CFG_PORT_CTL_NUM_VT_MASK GENMASK(13, 12) /* number of TVs */
@@ -564,8 +566,6 @@ enum WX_MSCA_CMD_value { #define TXD_USE_COUNT(S) DIV_ROUND_UP((S), WX_MAX_DATA_PER_TXD) #define DESC_NEEDED (MAX_SKB_FRAGS + 4)
-#define WX_CFG_PORT_ST 0x14404 - /******************* Receive Descriptor bit definitions **********************/ #define WX_RXD_STAT_DD BIT(0) /* Done */ #define WX_RXD_STAT_EOP BIT(1) /* End of Packet */