From: Heiko Stuebner heiko.stuebner@theobroma-systems.com
[ Upstream commit 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff ]
The puma vcc5v0_host regulator node currently uses opposite active-values for the enable pin. The gpio-declaration uses active-high while the separate enable-active-low property marks the pin as active low.
While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now.
So bring this in line and make both properties match, similar to the gmac fix.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 1fc5060d7027e..b08a998ca1024 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -138,7 +138,7 @@ vcc3v3_sys: vcc3v3-sys {
vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>;