On system resume, the gpmi clock must be enabled before accessing gpmi block. Without this, resume causes something like
[ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110 [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110 [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110
Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal esben@geanix.com --- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c index 334fe3130285..879df8402446 100644 --- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c @@ -148,6 +148,10 @@ static int gpmi_init(struct gpmi_nand_data *this) struct resources *r = &this->resources; int ret;
+ ret = pm_runtime_get_sync(this->dev); + if (ret < 0) + return ret; + ret = gpmi_reset_block(r->gpmi_regs, false); if (ret) goto err_out; @@ -179,8 +183,9 @@ static int gpmi_init(struct gpmi_nand_data *this) */ writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
- return 0; err_out: + pm_runtime_mark_last_busy(this->dev); + pm_runtime_put_autosuspend(this->dev); return ret; }