The current ZLP handling for ep0 requests is only for control IN requests. For OUT direction, DWC3 needs to check and setup for MPS alignment.
Usually, control OUT requests can indicate its transfer size via the wLength field of the control message. So usb_request->zero is usually not needed for OUT direction. To handle ZLP OUT for control endpoint, make sure the TRB is MPS size.
Cc: stable@vger.kernel.org Fixes: c7fcdeb2627c ("usb: dwc3: ep0: simplify EP0 state machine") Fixes: d6e5a549cc4d ("usb: dwc3: simplify ZLP handling") Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com --- drivers/usb/dwc3/ep0.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index b0363e3ba4d1..5580caed8b0c 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -947,12 +947,16 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc, static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req) { + unsigned int trb_length = 0; int ret;
req->direction = !!dep->number;
if (req->request.length == 0) { - dwc3_ep0_prepare_one_trb(dep, dwc->ep0_trb_addr, 0, + if (!req->direction) + trb_length = dep->endpoint.maxpacket; + + dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, trb_length, DWC3_TRBCTL_CONTROL_DATA, false); ret = dwc3_ep0_start_trans(dep); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) @@ -999,9 +1003,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
req->trb = &dwc->ep0_trb[dep->trb_enqueue - 1];
+ if (!req->direction) + trb_length = dep->endpoint.maxpacket; + /* Now prepare one extra TRB to align transfer size */ dwc3_ep0_prepare_one_trb(dep, dwc->bounce_addr, - 0, DWC3_TRBCTL_CONTROL_DATA, + trb_length, DWC3_TRBCTL_CONTROL_DATA, false); ret = dwc3_ep0_start_trans(dep); } else {