From: Neil Armstrong narmstrong@baylibre.com
[ Upstream commit 1b208bab34dc3f4ef8f408105017d4a7b72b2a2f ]
This adds the USB Glue node, with the USB2 & USB3 controllers along the single USB2 PHY node.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com Reviewed-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Signed-off-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 ++++++++++++++++++++++ 1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 502c4ac45c29e..af1c50428eb7e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -170,6 +170,46 @@ soc { #size-cells = <2>; ranges;
+ usb: usb@ffe09080 { + compatible = "amlogic,meson-axg-usb-ctrl"; + reg = <0x0 0xffe09080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; + resets = <&reset RESET_USB_OTG>; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -1725,6 +1765,16 @@ sd_emmc_c: mmc@7000 { clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; + + usb2_phy1: phy@9020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x9020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + }; };
sram: sram@fffc0000 {