From: Johan Hovold johan@kernel.org
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/rc/redrat3.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
--- a/drivers/media/rc/redrat3.c +++ b/drivers/media/rc/redrat3.c @@ -427,7 +427,7 @@ static int redrat3_send_cmd(int cmd, str udev = rr3->udev; res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), cmd, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0000, 0x0000, data, sizeof(u8), HZ * 10); + 0x0000, 0x0000, data, sizeof(u8), 10000);
if (res < 0) { dev_err(rr3->dev, "%s: Error sending rr3 cmd res %d, data %d", @@ -493,7 +493,7 @@ static u32 redrat3_get_timeout(struct re pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_GET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, HZ * 5); + RR3_IR_IO_SIG_TIMEOUT, 0, tmp, len, 5000); if (ret != len) dev_warn(rr3->dev, "Failed to read timeout from hardware\n"); else { @@ -523,7 +523,7 @@ static int redrat3_set_timeout(struct rc ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, RR3_IR_IO_SIG_TIMEOUT, 0, timeout, sizeof(*timeout), - HZ * 25); + 25000); dev_dbg(dev, "set ir parm timeout %d ret 0x%02x\n", be32_to_cpu(*timeout), ret);
@@ -557,32 +557,32 @@ static void redrat3_reset(struct redrat3 *val = 0x01; rc = usb_control_msg(udev, rxpipe, RR3_RESET, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - RR3_CPUCS_REG_ADDR, 0, val, len, HZ * 25); + RR3_CPUCS_REG_ADDR, 0, val, len, 25000); dev_dbg(dev, "reset returned 0x%02x\n", rc);
*val = length_fuzz; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_LENGTH_FUZZ, 0, val, len, HZ * 25); + RR3_IR_IO_LENGTH_FUZZ, 0, val, len, 25000); dev_dbg(dev, "set ir parm len fuzz %d rc 0x%02x\n", *val, rc);
*val = (65536 - (minimum_pause * 2000)) / 256; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MIN_PAUSE, 0, val, len, HZ * 25); + RR3_IR_IO_MIN_PAUSE, 0, val, len, 25000); dev_dbg(dev, "set ir parm min pause %d rc 0x%02x\n", *val, rc);
*val = periods_measure_carrier; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_PERIODS_MF, 0, val, len, HZ * 25); + RR3_IR_IO_PERIODS_MF, 0, val, len, 25000); dev_dbg(dev, "set ir parm periods measure carrier %d rc 0x%02x", *val, rc);
*val = RR3_DRIVER_MAXLENS; rc = usb_control_msg(udev, txpipe, RR3_SET_IR_PARAM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - RR3_IR_IO_MAX_LENGTHS, 0, val, len, HZ * 25); + RR3_IR_IO_MAX_LENGTHS, 0, val, len, 25000); dev_dbg(dev, "set ir parm max lens %d rc 0x%02x\n", *val, rc);
kfree(val); @@ -602,7 +602,7 @@ static void redrat3_get_firmware_rev(str rc = usb_control_msg(rr3->udev, usb_rcvctrlpipe(rr3->udev, 0), RR3_FW_VERSION, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, buffer, RR3_FW_VERSION_LEN, HZ * 5); + 0, 0, buffer, RR3_FW_VERSION_LEN, 5000);
if (rc >= 0) dev_info(rr3->dev, "Firmware rev: %s", buffer); @@ -842,14 +842,14 @@ static int redrat3_transmit_ir(struct rc
pipe = usb_sndbulkpipe(rr3->udev, rr3->ep_out->bEndpointAddress); ret = usb_bulk_msg(rr3->udev, pipe, irdata, - sendbuf_len, &ret_len, 10 * HZ); + sendbuf_len, &ret_len, 10000); dev_dbg(dev, "sent %d bytes, (ret %d)\n", ret_len, ret);
/* now tell the hardware to transmit what we sent it */ pipe = usb_rcvctrlpipe(rr3->udev, 0); ret = usb_control_msg(rr3->udev, pipe, RR3_TX_SEND_SIGNAL, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0, 0, irdata, 2, HZ * 10); + 0, 0, irdata, 2, 10000);
if (ret < 0) dev_err(dev, "Error: control msg send failed, rc %d\n", ret);