The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2024100155-shaking-flight-b258@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") 654a8d6c93e7 ("tty: serial: qcom-geni-serial: Implement start_rx callback") c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold johan+linaro@kernel.org Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out.
As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register.
A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout.
Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout.
Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed.
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable@vger.kernel.org # 4.17 Reported-by: Douglas Anderson dianders@chromium.org Tested-by: Nícolas F. R. A. Prado nfraprado@collabora.com Signed-off-by: Johan Hovold johan+linaro@kernel.org Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data;
if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; }
/* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout;
qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud;
sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK;
- if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud);
+ /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);