From: Emil Renner Berthing emil.renner.berthing@canonical.com
[ Upstream commit 334c7b13d38321e47d1a51dba0bef9f4c403ec75 ]
Commit 2cfe9bbec56ea579135cdd92409fff371841904f added support for the RGB and green PWM controlled LEDs on the HiFive Unmatched board managed by the leds-pwm-multicolor and leds-pwm drivers respectively. All three colours of the RGB LED and the green LED run from different lines of the same PWM, but with the same period so this works fine when the LED drivers are loaded one after the other.
Unfortunately it does expose a race in the PWM driver when both LED drivers are loaded at roughly the same time. Here is an example:
| Thread A | Thread B | | led_pwm_mc_probe | led_pwm_probe | | devm_fwnode_pwm_get | | | pwm_sifive_request | | | ddata->user_count++ | | | | devm_fwnode_pwm_get | | | pwm_sifive_request | | | ddata->user_count++ | | ... | ... | | pwm_state_apply | pwm_state_apply | | pwm_sifive_apply | pwm_sifive_apply |
Now both calls to pwm_sifive_apply will see that ddata->approx_period, initially 0, is different from the requested period and the clock needs to be updated. But since ddata->user_count >= 2 both calls will fail with -EBUSY, which will then cause both LED drivers to fail to probe.
Fix it by letting the first call to pwm_sifive_apply update the clock even when ddata->user_count != 1.
Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Emil Renner Berthing emil.renner.berthing@canonical.com Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-sifive.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c index 85760c90278c0..41a6fc47cc163 100644 --- a/drivers/pwm/pwm-sifive.c +++ b/drivers/pwm/pwm-sifive.c @@ -184,7 +184,13 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm,
mutex_lock(&ddata->lock); if (state->period != ddata->approx_period) { - if (ddata->user_count != 1) { + /* + * Don't let a 2nd user change the period underneath the 1st user. + * However if ddate->approx_period == 0 this is the first time we set + * any period, so let whoever gets here first set the period so other + * users who agree on the period won't fail. + */ + if (ddata->user_count != 1 && ddata->approx_period) { mutex_unlock(&ddata->lock); ret = -EBUSY; goto exit;