From: Joerg Roedel jroedel@suse.de
[ Upstream commit fef81c86262879d4b1176ef51a834c15b805ebb9 ]
Check whether the hypervisor reported the correct C-bit when running as an SEV guest. Using a wrong C-bit position could be used to leak sensitive data from the guest to the hypervisor.
Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Borislav Petkov bp@suse.de Link: https://lkml.kernel.org/r/20210312123824.306-8-joro@8bytes.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/boot/compressed/head_64.S | 83 ++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index e94874f4bbc1..f670e0579a3b 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -172,11 +172,21 @@ SYM_FUNC_START(startup_32) */ call get_sev_encryption_bit xorl %edx, %edx +#ifdef CONFIG_AMD_MEM_ENCRYPT testl %eax, %eax jz 1f subl $32, %eax /* Encryption bit is always above bit 31 */ bts %eax, %edx /* Set encryption mask for page tables */ + /* + * Mark SEV as active in sev_status so that startup32_check_sev_cbit() + * will do a check. The sev_status memory will be fully initialized + * with the contents of MSR_AMD_SEV_STATUS later in + * set_sev_encryption_mask(). For now it is sufficient to know that SEV + * is active. + */ + movl $1, rva(sev_status)(%ebp) 1: +#endif
/* Initialize Page tables to 0 */ leal rva(pgtable)(%ebx), %edi @@ -261,6 +271,9 @@ SYM_FUNC_START(startup_32) movl %esi, %edx 1: #endif + /* Check if the C-bit position is correct when SEV is active */ + call startup32_check_sev_cbit + pushl $__KERNEL_CS pushl %eax
@@ -786,6 +799,76 @@ SYM_DATA_START_LOCAL(loaded_image_proto) SYM_DATA_END(loaded_image_proto) #endif
+/* + * Check for the correct C-bit position when the startup_32 boot-path is used. + * + * The check makes use of the fact that all memory is encrypted when paging is + * disabled. The function creates 64 bits of random data using the RDRAND + * instruction. RDRAND is mandatory for SEV guests, so always available. If the + * hypervisor violates that the kernel will crash right here. + * + * The 64 bits of random data are stored to a memory location and at the same + * time kept in the %eax and %ebx registers. Since encryption is always active + * when paging is off the random data will be stored encrypted in main memory. + * + * Then paging is enabled. When the C-bit position is correct all memory is + * still mapped encrypted and comparing the register values with memory will + * succeed. An incorrect C-bit position will map all memory unencrypted, so that + * the compare will use the encrypted random data and fail. + */ +SYM_FUNC_START(startup32_check_sev_cbit) +#ifdef CONFIG_AMD_MEM_ENCRYPT + pushl %eax + pushl %ebx + pushl %ecx + pushl %edx + + /* Check for non-zero sev_status */ + movl rva(sev_status)(%ebp), %eax + testl %eax, %eax + jz 4f + + /* + * Get two 32-bit random values - Don't bail out if RDRAND fails + * because it is better to prevent forward progress if no random value + * can be gathered. + */ +1: rdrand %eax + jnc 1b +2: rdrand %ebx + jnc 2b + + /* Store to memory and keep it in the registers */ + movl %eax, rva(sev_check_data)(%ebp) + movl %ebx, rva(sev_check_data+4)(%ebp) + + /* Enable paging to see if encryption is active */ + movl %cr0, %edx /* Backup %cr0 in %edx */ + movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */ + movl %ecx, %cr0 + + cmpl %eax, rva(sev_check_data)(%ebp) + jne 3f + cmpl %ebx, rva(sev_check_data+4)(%ebp) + jne 3f + + movl %edx, %cr0 /* Restore previous %cr0 */ + + jmp 4f + +3: /* Check failed - hlt the machine */ + hlt + jmp 3b + +4: + popl %edx + popl %ecx + popl %ebx + popl %eax +#endif + ret +SYM_FUNC_END(startup32_check_sev_cbit) + /* * Stack and heap for uncompression */