6.17-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang xu.yang_2@nxp.com
commit e89ee35567d3d465ef0715953170be72f5ef1d4c upstream.
According to the board design, set SEL to high means flipped connection (TX2/RX2). And the TCPM will output logical 1 if it needs flipped connection. So switch to active high for select-gpios. The EN pin on mux chip is low active, so switch to active low for enable-gpios too.
Fixes: b237975b2cd5 ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes") Cc: stable@vger.kernel.org Reviewed-by: Jun Li jun.li@nxp.com Signed-off-by: Xu Yang xu.yang_2@nxp.com Reviewed-by: Frank Li Frank.Li@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -217,8 +217,8 @@ compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; - select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_LOW>; - enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; + select-gpios = <&lsio_gpio4 6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&lsio_gpio4 19 GPIO_ACTIVE_LOW>; orientation-switch;
port {